- Research article
- Open Access
Mutations of DnaA-boxes in the oriR region increase replication frequency of the MiniR1–1 plasmid
BMC Microbiology volume 18, Article number: 27 (2018)
The MiniR1–1 plasmid is a derivative of the R1 plasmid, a low copy cloning vector.
Nucleotide sequencing analysis shows that the MiniR1–1 plasmid is a 6316 bp circular double-stranded DNA molecule with an oriR1 (origin for replication). The plasmid carries the repA, tap, copA and bla genes, and genes for ORF1 and ORF2. MiniR1–1 contains eight DnaA-binding sites (DnaA-boxes). DnaA-box1 is in the oriR1 region and fully matched to the DnaA-box consensus sequence, and DnaA-box8, with one mismatch, is close to the copA gene. The presence of the MiniR1–1 plasmid leads to an accumulation of the D-period cells and an increase in cell size of slowly growing Escherichia coli cells, suggesting that the presence of MiniR1–1 delays cell division. Mutations in the MiniR1–1 DnaA-box1 and DnaA-box8 significantly increase the copy number of the plasmid and the mutations in DnaA-box1 also affect cell size. It is likely that titration of DnaA to DnaA-boxes negatively controls replication of the MiniR1–1 plasmid and delays cell division. Interestingly, DnaA weakly interacts with the initiator protein RepA in vivo.
DnaA regulates the copy number of MiniR1–1 as a negative factor through interacting with the RepA protein.
The R1 plasmid is a large conjugative plasmid of size 95.8 kb [1, 2]. It is a low copy number plasmid and belongs to the IncFII group . The plasmid carries bla (ampicillin), cat (chloramphenicol), neo (kanamycin), aad (streptomycin/spectinomycin) and sul (sulfonamide) genes in the R-determinant, which contains three insertion sequences and a Tn4 transposon . The basic replicon elements and stability systems including partition (parA), killing (hok/sok or parB), second killing (parD), and conjugation (tra) gene cassettes are distributed around the plasmids . ParA is responsible for partition of the plasmid, ensuring that each daughter cell receives certain copies of the plasmid . The hok gene product kills cells which have not received the plasmid at cell division . Proteins encoded by the tra operon mediate conjugal transfer of the plasmid into plasmid-free cells . The R1 basic replicon element is about 2 kb, and contains oriR1, and repA, copA, copB and tap genes . Products of these genes are required for initiation of plasmid replication and copy number control. The copA gene encodes an antisense RNA that limits translation of RepA protein. The other gene, tap, encodes a small leader peptide (Tap, translational activator peptide) .
The R1 plasmid replication initiates at oriR, and proceeds unidirectionally according to the Theta mode [2, 9]. Initiation of replication depends on the plasmid RepA and the host DnaA proteins . DnaA recognizes and binds specifically to a DnaA-box with a conservative 9-mer TTA/TTNCACA sequence in oriR  only when RepA is bound to the sequence immediately downstream of the DnaA-box . RepA triggers initiation of replication of the R1 plasmid efficiently when DnaA is bound to the DnaA-box in oriR [10, 12]. However, RepA opens the double-helix and facilitates assembly of the replisome at oriR, and can support replication of the R1 plasmid in vivo in the absence of DnaA [13, 14]. Controversially, it is reported that replication of the R1 plasmid is inefficient in the absence of DnaA and presence of normal levels of RepA .
Several MiniR1 plasmids have been reported. The Rsc11 plasmid is a derivative of R1drd-19B2 , containing a transposon carrying the bla gene and the basic replicon region. The pKN177 and pKN182 plasmids are originated from the R1 copy mutant pKN104 . The pJEL109 plasmid is another R1 derived vector with 1–2 copies per host chromosome , carrying the R1 origin of replication, the bla gene from Tn3 and unique cloning sites . In this work, pJEL109 was renamed as MiniR1–1 and its complete genome was sequenced. Further, we found that the presence of the MiniR1–1 plasmid delayed cell division, and affected initiation of chromosome replication but not chromosome segregation. Mutagenesis analysis showed that mutations in the MiniR1–1 DnaA-box1 and DnaA-box8 increased copy number of the plasmid and affected both cell size and growth rate.
Bacterial strains and plasmids
All bacterial strains used were E. coli K-12 and are listed in Table 1.
Growth conditions and growth rate determination
Cells were grown exponentially at 30 °C in AB minimal medium  supplemented with 10 μg/ml thiamine, 0.2% Ala, 20 μg/ml Met, 20 μg/ml Trp and 20 μg/ml His (ABT) , or AB supplemented with 10 μg/ml thiamine, 0.2% glucose and 0.5% casamino acids (ABTG-CAA) . 50 μg/ml of ampicillin was added when required for selection. To determine the doubling time of an exponentially growing culture, the OD450 of the culture was measured at different time points. Using the values of log2OD as the Y-axis and the time (TX-T0, T0 represents the time at which the first OD value was measured; TX represents the time at which the OD values were measured) as the X-axis, the doubling time (minutes) could be calculated from the formula y = ax+b, where ‘a’ (slope) represents the doubling time (minutes) of the cell culture analyzed.
Exponentially growing cells in poor medium were centrifuged for collection, or treated with two drugs (300 μg/ml rifampicin and 10 μg/ml cephalexin) to inhibit both initiation of replication and cell division for several generations as described . Functions of rifampicin and cephalexin are as mentioned previously [22, 23]. Cells untreated or treated with the drugs were fixed in 70% ethanol and then analyzed by flow cytometry (BD LSRFortessa) after one wash in Tris-HCl buffer (pH 7.5) and subsequent stainning with Hoechst 33,258 (1.5 μg/ml) for 30 min. The percentage of B-period cells was determined from the amount of one-chromosome cells estimated by flow cytometry; the percentage of D-period cells was calculated from the amount of two-chromosome cells; the percentage of C-period cells was determined from the amount of cells with DNA contents between the one-chromosome and two-chromosomes (Additional file 1: Figure S1). Preparation of standard sample and post analysis were as described previously .
Genome sequencing of the MiniR1–1 plasmid
The MiniR1–1 plasmid genome was sequenced using primers targeting the datA sequence in pMOR1, a derivate of MiniR1–1, carrying a datA site inserted between BamHI and HindIII sites . Subsequently using the sequences links at the BamHI and HindIII sites, the genome sequence of MiniR1–1 was determined.
Site directed mutagenesis kit was used to introduce one or more mutations into DnaA-boxes or ORFs of the MiniR1–1 plasmid. Using the partial overlapping primer design technique , primers were designed as listed in Table 2. The mutated plasmids, positions of mutations introduced, and sequences before and after mutagenesis are listed in Table 3.
Copy number determination of the plasmids by Q-PCR
Exponentially growing cells in ABT medium were collected, and then heated at 95 °C in 50 μL ddH2O for 10 min, and diluted serially in ddH2O prior to Q-PCR .
The ampicillin resistance gene (bla) in plasmids was used to determine the copy number of plasmid relative to the dosage of chromosomal terC site. The bla and terC specific primers for Q-PCR were designed using PrimerQuest online tool, and listed in Table 2.
The Q-PCR assay was performed in a LightCycter 480 II Real-Time PCR System (Roche, Switzerland) using SYBR®Premix ExTaq™II kit (TliRNaseH Plus) (TaKaRa, Japan). After an initial denature at 95 °C for 30 s, 40 cycles of 95 °C for 10 s, 60 °C for 20 s were used in the assay. Then melting curves were performed immediately as described previously . The value of Ct from each reaction could automatically be given. Using the concentrations of template (the X axis) and threshold cycles (the Y axis), the relative standard curve was obtained. The amplification efficiency (E) was then calculated by the eq. 1, and the gene dosage was determined using the eq. 2 as described previously . The copy number of plasmid relative to the terC site in each strain was then calculated.
Bacterial two hybrid analysis
Plasmids and strain used in the bacterial two hybrid system (BCATH) are listed in Table 1. When two proteins interact, the T18 and T25 fragments can be combined together to catalyze the formation of cAMP. The synthesized cAMP activates the expression of the lacZ reporter gene, forming the blue colonies on plates containing X-gal and IPTG, whereas two proteins that do not interact will form white colonies. The BTH101 cells with a pair of plasmids expressing the proteins tested for interaction were cultured as previously described .
The presence of MiniR1–1 leads to an accumulation of the D-period cells
Analogous to the eukaryotic G1, S and M phase, slowly growing Escherichia coli cells can be classified into three stages of the cell cycle, i.e. B-, C- and the D-period, respectively [19, 28]. The B-period is the time between cell birth and initiation of chromosome replication; the C-period indicates the time required for chromosome replication; and the D-period is the time taken for cell division after chromosome segregation . To see if the presence of MiniR1–1 plasmid affects the E. coli cell cycle, wild-type MG1655 cells were transformed with plasmids MiniR1–1 or pACYC177, respectively. The resultant transformants and the wild-type cells were exponentially grown at 30 °C in ABT medium as described in Methods . The cell cycle parameters were measured by flow cytometry. In the wild-type MG1655 cell culture, 39% of the cells were in B-, 48% in C-, and 13% in the D-period with a doubling time of 196 min, whereas the presence of MiniR1–1 plasmid changed the distribution of cells to 28% in B-, 41% in C-, and 31% in the D-period with a doubling time of 195 min (Fig. 1a, Tables 4 and 5). The cell cycle parameters were not found to change due to different concentrations of ampicillin used in the medium (Additional file 2: Figure S2, Additional file 3 : Table S1). It is clear that the presence of MiniR1–1 plasmid increased the proportion of D-period cells, and that the proportions of cells in the B- and C-period were less than in the wild-type cells. The doubling time remained the same as that of the wild-type cells (Table 5). The presence of control plasmid pACYC177 resulted in a cell cycle distribution close to that of the wild-type with slightly more C- and D- period cells, but less B-period cells (Fig. 1a, Table 4). These results indicate that the presence of MiniR1–1 plasmid leads to an accumulation of the D-period cells.
MiniR1–1 delays cell division
As described in the previous paragraph, the presence of MiniR1–1 leads to an accumulation of the D-period cells, and this can be due to a delay in cell division. To test this possibility, the cell size of exponentially growing cells grown under the same conditions as described above were measured by microscopy. Compared with the size of wild-type MG1655 cells (2.2 μm), the presence of MiniR1–1 plasmid, but not of pACYC177 plasmid, led to an increase in cell size (2.7 μm) without changing the doubling time (Table 5), suggesting that the presence of MiniR1 delays cell division. It is shown that cell division depends on chromosome replication, but that chromosome replication occurs without cell division . Thus, an inhibition of chromosome replication stops cell division and this prevents premature cell division . It is reasonable to assume that the delay in cell division could be due to a delay in initiation of chromosome replication in the presence of MiniR1–1. To test this hypothesis, exponentially growing cells in the medium mentioned above were treated with rifampicin and cephalexin for 3–5 generations and then analyzed by flow cytometry. As shown in Fig. 1b, the cells with MiniR1–1 plasmid had less one-chromosome and more two-chromosome cells compared to cells without plasmid or cells with pACYC177 plasmid. The initiation pattern of chromosome replication was not dependent on concentration of ampicillin used in the medium (Additional file 2: Figure S2, Additional file 4: Table S2). The average number of chromosome per cell was increased to 1.7 in the presence of MiniR1–1 relative to 1.5 in the wild-type cell or presence of pACYC177 (Table 6), showing that the number of chromosomes per cells is slightly increased in the presence of MiniR1–1, suggesting that the presence of MiniR1–1 leads to early initiation of chromosome replication. We conclude that the delayed cell division in the presence of MiniR1–1 is not due to problems in initiation of chromosome replication.
Complete nucleotide sequence of the MiniR1–1 plasmid
The oriR1 region of R1 plasmid contains a DnaA-box . Thus, titration of DnaA proteins to DnaA-boxes in MiniR1–1 could be the reason why the presence of MiniR1–1 delays cell division, since excess datA sites delay both initiation of chromosome replication and cell division . The datA site is a 1 kb region carrying five DnaA-boxes, binding a large amount of initiator DnaA protein . To check if the MiniR1–1 plasmid contains additional potential DnaA-boxes besides one in oriR1, we sequenced the MiniR1–1 plasmid genome using primers targeting the datA sequence in pMOR1 as described in Methods. The MiniR1–1 plasmid is a circular double stranded DNA molecule, consisting of 6316 bp (Fig. 2, Additional file 5: Figure S3). The plasmid has a 188 bp oriR1 region  situated close to the repA, tap and copA genes. The tap gene encodes a small leader peptide  and the copA gene is transcribed in the opposite direction compared to the tap transcriptions . The repA and tap genes are separated by ORF1 and there is an ORF2 between oriR1 and the bla gene. ORF1 is predicted to encode a protein which is a hypothetical protein (SEEMU129_23570) of Salmonella enterica subsp. enteric aserovar Muenchen str. RKS4129 and a hypothetical protein (pU302L_074) of Salmonella enterica subsp. enterica serovar Typhimurium. ORF2 is predicted to encode fimbrial-like adhesin protein of E. coli. Eight DnaA-boxes found are situated as indicated in the MiniR1–1 genetic map (Fig. 2). One consensus DnaA-box is in oriR1, one DnaA-box with one mismatch and six DnaA-boxes with two mismatches are also shown in the genetic map, namely, DnaA-box1, box2, box3, box4, box5, box6, box7 and box8, respectively (Fig. 2).
We also analyzed restriction sites of MiniR1–1 using software BVTech Plasmid which is available on the internet (http://www.biovisualtech.com/bvplasmid/downloadpl.htm). The MiniR1–1 plasmid has 36 restriction sites in total. There are 4 restriction sites in the downstream region of ORF2, 3 in bla gene, 13 between copA and bla genes, and 16 in ORF1 (Fig. 2).
Mutations in DnaA-boxes increases the copy number of MiniR1–1
To interfere with titration (binding) of DnaA to DnaA-boxes, mutations were introduced into the MiniR1–1 DnaA-boxes by using site directed mutagenesis. A pair of primers (DnaA-box1CA-TG) was used to change two nucleotides in DnaA-box1, constructing plasmid pbox1CA-TG. Further, using pbox1CA-TG as template and primers DnaA-box1TT-GG, two more nucleotide changes were introduced into DnaA-box1, resulting in a plasmid with scrambled DnaA-box1, pbox1TT-GG. Also a pair of primers (DnaA-box3TA-GG) was used to introduce mutations in DnaA-box3. The ORF1–11 L-W or ORF2M-V primer pairs were designed to change one amino acid in ORF1 or ORF2. Two nucleotides in DnaA-box8 were changed by use of the DnaA-box8TT-GG primers. The resultant plasmids and nucleotide changes after mutagenesis are listed in Table 3 and the primers used are listed in Table 2.
To determine the relative copy number of MiniR1–1, slowly growing MG1655 cells harboring a single plasmid (Table 3) in ABT medium were collected and subsequently used as template for Q-PCR analysis  as described in Methods. We found that the relative copy number of the control plasmid pACYC177 per the chromosomal terC site was 11 whereas that of MiniR1–1 was 1 (Table 7). The relative copy number of MiniR1–1 was increased to 6 copies per terC upon mutations in the MiniR1–1 DnaA-box1, it was 5 copies responding to mutations in DnaA-boxes8 and 2 copies to mutations in DnaA-box3 (Table 7). It should be noted that mutations in ORF1 did not change the plasmid copy number. The results indicate that mutations in the MiniR1–1 DnaA-boxes increase the copy number of MiniR1–1, suggesting that binding of DnaA to DnaA-boxes in MiniR1–1 negatively controls initiation of the plasmid replication.
The presence of MiniR1–1 with scrambled DnaA-box1 or mutated box8 affects cell size and growth rate
The subsequent cell cycle parameter measurement by flow cytometry showed that the cells harbouring plasmids with mutations in DnaA-box1, box3, box8 or ORF1 showed a slight increase in the proportion of C-period cells and a minor decrease in the proportion of D-period cells relative to the cells containing MiniR1–1 (Fig. 3a, Table 4). The cells maintained the initiation pattern of chromosome replication in the cells harbouring wild-type MiniR1–1 (Fig. 3b, Table 6). The presence of plasmid pbox1TT-GG (MiniR1–1 with scrambled DnaA-box1), particularly, did not affect initiation of chromosomal replication (Fig. 3b), indicating that scrambled DnaA-box1 in oriR1 does not affect chromosome replication.
Interestingly, the cells carrying MiniR1–1 with scrambled DnaA-box1 had a larger cell size (3.3 μm) and slower growth rate relative to cells with MiniR1–1 (Table 5). On the contrary, mutations in DnaA-box8 (pbox8TT-GG) led to a significant decrease in cell size (2.0 μm) relative to that in the presence of MiniR1–1 (2.7 μm) without affecting the growth rate (Table 5). The results suggest that the delay in cell division in the presence of MiniR1–1 may be, at least, partially due to titration of DnaA to DnaA-box1 and box8, and that DnaA-box1 functions differently from DnaA-box8.
Mutations in ORF2 of MiniR1–1 affect cell survival
Unexpectedly, mutations in DnaA-box4, which is situated in ORF2 of MiniR1–1, led to cell death in AB minimal medium (Table 5), but the mutations allowed cell growth in rich media (LB) and ABTGcasa (see Methods). The mutations led to a change of methionine to valine in ORF2 which is a predicted E. coli fimbrial-like adhesin protein. The bacterial fimbrial–like adhesion protein is a macromolecular structure, mediating the attachment of bacteria to a surface . The results indicate that mutations in ORF 2 of MiniR1–1 affect cell survival.
The DnaA protein weakly interacts with the initiator RepA protein
We show that mutations in DnaA-box1 in the oriR region significantly increase the copy number of MiniR1–1 plasmid, suggesting that binding of DnaA to DnaA-box1 decrease the initiation frequency of MiniR1–1 replication. It has been suggested that DnaA might interact with a RepA-oriR pre-initiation complex in the absence of DnaA-box in oriR to trigger initiation of replication [10, 12]. It could be possible that DnaA might interact with RepA at oriR to strictly control initiation of the MiniR1–1 replication. To check this possibility, we analyzed the interaction of DnaA with RepA in vivo by bacterial two hybrid system . When two proteins physically interact in the bacterial two-hybrid system, the reporter lacZ gene can be expressed in a cAMP/CRP (cAMP receptor protein)-dependent way . This expression can produce blue colonies, on LB plates containing X-gal, whereas white colonies will appear upon no interaction between the proteins. The cells expressing DnaA and RepA resulted in very weak blue colonies whereas the positive control (TorR-MreB interaction) gave rise to blue colonies , and the negative control cell colonies remained white (Fig. 4). The results indicate that DnaA interacts with RepA weakly in vivo (Fig. 4), suggesting that direct interaction between DnaA and RepA may be required for fine control of the MiniR1–1 replication.
DnaA is a negative factor for replication of the MiniR1–1 plasmid
RepA-driven initiation of the R1 plasmid replication is more efficient in the presence of DnaA [10, 12]. However, RepA initiates replication of the R1 plasmid at oriR in vivo in the absence of DnaA [13, 14]. As shown in Fig. 2, DnaA-box1 is in oriR1, and mutations in DnaA-box1 increases copy number of the plasmid from 1 to 6 copies per terC (Table 7). The result suggests that the binding of DnaA to DnaA-box1 negatively controls initiation of the MiniR1–1 replication as a possible result of DnaA interfering with the function of RepA. DnaA-box8 is immediately downstream of the copA gene which transcribes antisense RNA, and the RNA inhibits RepA-translation. Mutations in DnaA-box8 leads also to a significant increase in copy number of the MiniR1–1 plasmid (Table 7). Interestingly, mutations in DnaA-box3, which is situated upstream of ORF2, slightly increase copy number of the plasmid (only 2 copies per cell). Clearly, the effect of DnaA-box3 is different from that of the DnaA-box1 and DnaA-box8 on initiation of the plasmid replication. It is most likely that binding of DnaA to DnaA-box8 may limit CopA-RNA synthesis due to a close localization of DnaA-box8 to the copA gene, and consequently promote RepA-translation. The enhanced RepA production, in turn, initiates replication of MiniR1–1 more efficiently. Therefore, we conclude that DnaA is a negative factor for control of the MiniR1–1 replication, and may balance copy number of the plasmid through interacting with RepA (Fig. 4).
Titration of DnaA to the MiniR1–1 DnaA-boxes affect cell size and growth rate
The cell size of E.coli is highly correlated with the growth rate, i.e. cells are larger when growing under fast growth conditions compared to poor growth conditions. Indeed, it was shown that the E. coli wild-type cells were larger with fast growth rate in rich medium (LB) and smaller with slower growth rate in ABTGcasa medium (not as rich as LB). Further, wild-type cells were found to be even smaller with very slow growth rate in poor medium (ABT) . Cells harbouring MiniR1–1 was found to be larger relative to the cells without MiniR1–1, but the growth rates of the two strains were the same. The result suggests that the cells with MiniR1–1 have difficulties with cell division since the growth rate is the same as that of the cells without MiniR1–1. It has been shown that growth rate is not always a measure for initiation of replication and cell division . We understand that cell division might be delayed when a strain has a larger cell size with the same or slower growth rate relative to those of the control strain. The conclusion is supported by the fact that the strain with MiniR1–1 had more D-period cells compared with the strain without the plasmid. Obviously, the accumulation of the D-period cells indicates a delay of cell division when the growth rate is the same.
As discussed above, the presence of MiniR1–1 plasmid delays cell division without delaying initiation of chromosome replication (Fig. 1). How does the presence of MiniR1–1 delay cell division? Mutations in the MiniR1–1 DnaA-box1 result in further delay in cell division (Table 5) and an increase in copy number of the plasmid (Table 7). The delayed cell division could be explained by the increased dosage of the MiniR1–1 DnaA-boxes since high dosage of DnaA-boxes would lead to a large decrease in DnaA availability as a result of titration of more DnaA to DnaA-boxes. A decrease in DnaA availability delays cell division . However, in contrast, mutations in DnaA-box8 produce smaller cells with increased copies of MiniR1–1 but not changing growth rate, suggesting that mutated DnaA-box8 facilitates cell division (Tables 5 and 7). Interestingly, mutations in DnaA-box3 do not change the delay of cell division due to the presence of MiniR1–1. It is likely that low copy MiniR1–1 may delay the E. coli cell division due to problems in partition of plasmid copies.
The presence of MiniR1–1 leads to a delay of the E. coli cell division in the slow growth condition. Mutations in the MiniR1–1 DnaA-boxes not only affect cell size and growth rate but also increase the copy number of the plasmid. It is likely that titration of DnaA to DnaA-boxes negatively controls replication of the MiniR1–1 plasmid through interacting with the initiator protein RepA.
- aad :
- bla :
cyclic adenosine monophosphate
- cat :
catabolite activator protein
- E. coli :
- neo :
- oriR :
origin for replication
copy number of plasmid
quantitative polymerase chain reaction
- sul :
translational activator peptide
Clerget M, Chandler M, Caro M. The structure of R1drd19: a revised physical map of the plasmid. Mol Gen Genet. 1981;181(2):183–91.
Diaz R, Origin SWL. Direction of mini-R1 plasmid DNA replication in cell extracts of Escherichia coli. J Bacteriol. 1982;150(3):1077–84.
Nordström K. Plasmid R1-replication and its control. Plasmid. 2006;55:1–26.
Womble DD, Genetic RRH. Physical map of plasmid NR1: comparison with other IncFII antibiotic resistance plasmids. Microbiol Rev. 1989;52:433–51.
Gerdes K, Molin S. Partitioning of plasmid R1. Structural and functional analysis of the parA locus J Mol Bio. 1986;190(3):269–79.
Achtman M, Kusećek B, Timmis KN. Tra cistrons and proteins encoded by the Escherichia coli antibiotic resistance plasmid R6-5. Mol Gen Genet. 1978;163(2):169–79.
Nordström K, Molin S, Light J. Control of replication of bacterial plasmids: genetics, molecular biology, and physiology of the plasmid R1 system. Plasmid. 1984;12(2):71–90.
Blomberg P, Nordström K, Wagner EG. Replication control of plasmid R1: RepA synthesis is regulated by CopA RNA through inhibition of leader peptide translation. EMBO J. 1992;11(7):2675–83.
Bramhill D, Kornberg A. A model for initiation at origins of DNA replication. Cell. 1988;54:915–8.
Masai H, Arai K. RepA and DnaA proteins are required for initiation of R1 plasmid replication in vitro and interact with the oriR sequence. PANS. 1987;84(14):4781–5.
Schaper S, Messer W. Interaction of the initiator protein DnaA of Escherichia coli with its DNA target. J Biol Chem. 1995;270(29):17622.
Ortega-Jiménez S, Giraldo-Suárez R, Fernández-Tresguerres ME, Berzal-Herranz A, Díaz-Orejas R. DnaA dependent replication of plasmid R1 occurs in the presence of point mutations that disrupt the dnaA box of oriR. Nucleic Acids Res. 1992;(10):2547–51.
Tang XB, Womble DD, Rownd RH. DnaA protein is not essential for replication of IncFII plasmid NR1. J Bacteriol. 1989;171(10):5290–5.
Bernander R, Dasgupta S, Nordström K. The E. coli cell cycle and the plasmid R1 replication cycle in the absence of the DnaA protein. Cell. 1991;64(6):1145–53.
Hansen EB, Yarmolinsky MB. Host participation in plasmid maintenance: dependence upon dnaA of replicons derived from P1 and F. PNAS. 1986;83(12):4423–7.
Goebel W, Bonewald R. Class of small multicopy plasmids originating from the mutant antibiotic resistance factor R1 drd-19B2. J Bacteriol. 1975;2:658–723.
Scott JR. Regulation of plasmid replication. Microbiol Rev. 1984;48(1):1–23.
Løbner-Olesen A, Boye E, Marinus MG. Expression of the Escherichia coli dam gene. Mol Microbiol. 1992;6(13):1841–51.
Clark DJ, Maaløe O. DNA replication and the division cycle in Escherichia coli. J Mol Biol. 1967;23(1):99–112.
Liu F, Qimuge, Hao J, Yan H, Bach T, Fan LF, et al. AspC-mediated aspartate metabolism coordinates the Escherichia coli cell cycle. PLoS One 2014; 9(3):e92229.
Morigen MF, Skarstad K. Deletion of the datA site does not affect once-per-cell-cycle timing but induces rifampin-resistant replication. J Bacteriol. 2005;187(12):3913–20.
Skarstad K, Boye E, Steen HB. Timing of initiation of chromosome replication in individual Escherichia coli cells. EMBO J. 1986;5(7):1711–7.
Boye E, Løbner-Olesen A. Bacterial growth control studied by flow cytometry. Res Microbiol. 1991;(2–3):131–6.
Morigen BE, Skarstad K, Lobner-Olesen A. Regulation of chromosomal replication by DnaA protein availability in Escherichia coli: effects of the datA region. Biochim Biophys Acta. 2001;1521(1–3):73–80.
Zheng L, Baumann U, Reymond L. An efficient one-step site-directed and site-saturation mutagenesis protocol. Nucleic Acids Res. 2004;32(14):e115.
Mihaela S, Veronika O, Jalen S, Simona J, Petra S, Borut S, et al. Improved determination of plasmid copy number using quantitative real-time PCR for monitoring fermentation processes. Microb Cell Factories. 2008;7(25):6.
Yao Y, Fan LF, Shi Y, Odsbu I, Morigen. A spatial control for correct timing of gene expression during the Escherichia coli cell cycle. Genes. 2016;8(1):1.
Cooper S, Helmstetter CE. Chromosome replication and the division cycle of Escherichia coli. Br J Mol Biol. 1968;31(3):519–40.
Boye E, Nordström K. Coupling the cell cycle to cell growth: a look at the parameters that regulate cell-cycle events. Embo Reps. 2003;(8):757–60.
Helmstetter CE, Pierucci O. Cell division during inhibition of deoxyribonucleic acid synthesis in Escherichia coli. J Bacteriol. 1968;5:1627–33.
Morigen, Løbner-Olesen A, Skarstad K. Titration of the Escherichia coli DnaA protein to excess datA sites causes destabilization of replication forks, delayed replication initiation and delayed cell division. Mol Microbiol. 2003;50(1):349–62.
Kitagawa R, Mitsuki H, Okazaki T, Ogawa T. A novel DnaA protein-binding site at 94.7 min on the Escherichia coli chromosome. Mol Microbiol. 1996;19(5):1137–47.
Masai H, Kaziro Y, Arai K. Definition of oriR, the minimum DNA segment essential for initiation of R1 plasmid replication in vitro. PNAS. 1983;(22):6814–8.
De Graaf FK, Mooi FR. The Fimbrial Adhesins of Escherichia Coli. Adv Microb Physiol. 1987;28:65–143.
Karimova G, Pidoux J, Ullmann A, Ladant D. A bacterial two-hybrid system based on a reconstituted signal transduction pathway. PNAS. 1998;95(10):5752–6.
Jensen KF. The Escherichia coli K-12 "wild types" W3110 and MG1655 have an rph frameshift mutation that leads to pyrimidine starvation due to low pyrE expression levels. J Bacteriol. 1993;175:3401–7.
Karimova G, Dautin N, Ladant D. Interaction network among Escherichia coli membrane proteins involved in cell division as revealed by bacterial two-hybrid analysis. J Bacteriol. 2005;187(7):2233–43.
We are grateful to Wurihan for her contribution in inserting the references of this paper.
This work was supported by grants from the National Natural Science Foundation of China (NSFC Grant no. 31060015 to Morigen), the Natural Science Foundation of Inner Mongolia (Grant no. 2010Zd14 to Morigen), the China Postdoctoral Science Foundation (Grant no. 21400–5175502 to Yuan Yao) and the Natural Science Foundation of Inner Mongolia (Grant no. 2017BS0315 to Yuan Yao). The grants (No. 31060015 and 2010Zd14) provided the reagents and consumables in the study, also supported the design of the study, interpretation of data. The grants (No. 21400–5175502 and 2017BS0315) was used to support write the manuscript.
Availability of data and materials
The datasets used and/or analysed during the current study are available from the corresponding author on reasonable request.
Ethics approval and consent to participate
Consent for publication
The authors declare that they have no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Figure S1. Illustration for determination of the B-, C and D-period in an exponentially growing cluture. (DOCX 215 kb)
Figure S2. The concentrations of ampicillin do not affect chromosomal replication pattern. (DOCX 75 kb)
Table S1. The concentrations of ampicillin do not affect the cell-cycle parameters. (DOCX 14 kb)
Table S2. The concentrations of ampicillin do not affect the average number of origin per cell. (DOCX 15 kb)
Figure S3. Sequencing results for the MiniR1–1 plasmid. (PDF 89 kb)
About this article
Cite this article
Yao, Y., Enkhtsetseg, S., Odsbu, I. et al. Mutations of DnaA-boxes in the oriR region increase replication frequency of the MiniR1–1 plasmid. BMC Microbiol 18, 27 (2018) doi:10.1186/s12866-018-1162-3
- MiniR1–1 replication
- Complete genome sequence
- E. coli Cell cycle