- Research article
- Open Access
Occurrence and characteristics of group 1 introns found at three different positions within the 28S ribosomal RNA gene of the dematiaceous Phialophora verrucosa: phylogenetic and secondary structural implications
BMC Microbiology volume 11, Article number: 94 (2011)
Group 1 introns (ribozymes) are among the most ancient and have the broadest phylogenetic distribution among the known self-splicing ribozymes. Fungi are known to be rich in rDNA group 1 introns. In the present study, five sequences of the 28S ribosomal RNA gene (rDNA) regions of pathogenic dematiaceous Phialophora verrucosa were analyzed using PCR by site-specific primers and were found to have three insertions, termed intron-F, G and H, at three positions of the gene. We investigated the distribution of group 1 introns in this fungus by surveying 34 strains of P. verrucosa and seven strains of Phialophora americana as the allied species.
Intron-F's (inserted at L798 position) were found in 88% of P. verrucosa strains, while intron-G's (inserted at L1921) at 12% and intron-H's (inserted at L2563) at 18%. There was some correlation between intron distribution and geographic location. In addition, we confirmed that the three kinds of introns are group 1 introns from results of BLAST search, alignment analysis and Reverse Transcriptase-Polymerase Chain Reaction (RT-PCR). Prediction of secondary structures and phylogenetic analysis of intron sequences identified introns-F and G as belonging to subgroup IC1. In addition, intron-H was identified as IE.
The three intron insertions and their insertion position in the 28S rDNA allowed the characterization of the clinical and environmental isolates of P. verrucosa and P. americana into five genotypes. All subgroups of introns-F and G and intron-H were characterized and observed for the first time in both species.
The type species Phialophora verrucosa was described by Medlar in 1915  when he isolated the fungus from a human skin disease. The species is ubiquitous and cosmopolitan, and are important plant saprobes as well as human pathogens. Identification is based on conidial ontogeny and molecular systematics. Few studies involving molecular genotyping techniques have been reported for P. verrucosa. A study analyzed restriction fragment length polymorphisms (RFLP) of mitochondrial DNA to determine genetic variations and phylogenetic relationships among P. verrucosa strains .
Different molecular typing tools, such as random amplification of polymorphic DNA (RAPD), RFLP, pulsed-field gel electrophoresis (PFGE), multilocus enzyme electrophoresis (MLEE) and multilocus sequence typing (MLST), have been developed to provide a better understanding of the molecular epidemiology of fungal pathogens, e.g., Candida albicans [3–5] and Aspergillus fumigatus [6, 7] and medically important filamentous fungi . However, although the majority of the reported group 1 intron sequences have been found in a wide range of fungi (Comparative RNA Web [CRW] site: http://www.rna.ccbb.utexas.edu/, few studies about sequence and structure variation, distribution and phylogenetic relationships of introns from a single species have been performed in detail. We focused on group 1 introns within 28S rDNA from P. verrucosa to evaluate the prevalence of intron polymorphism at the strain level.
As the first step to determine intron sequence divergence, sequences of 28S rDNA of five representative strains of P. verrucosa were analyzed to find insertions. Based on these five sequences, site-specific primers were designed for use in PCR to detect insertions on other P. verrucosa and P. americana strains studied, in order to investigate incidence and distribution of insertions. Moreover, to characterize the insertions, we analyzed the phylogeny of the introns found in this study and predicted their secondary structures.
Nucleotide structure of P. verrucosa28S sequences and the characterization intronic insertion
Since the sequence information of the 28S region was not available in public databases, we sequenced the 28S, including ITS, regions of five representative strains (Table 1) of P. verrucosa. Alignment of the five P. verrucosa rDNA sequences revealed the nucleotide sizes of 18S, ITS and 28S and the location of intron-F and G insertions (see Table 2 and Additional file 1). It was found that the sequences were composed of 29 nucleotides of partial 18S, 534-535 nucleotides of ITS and from 3349 to 4133 nucleotides of 28S regions. These genomic sequences were deposited at DDBJ and accession numbers are listed in Table 2. Twenty-five and two nucleotide substitutions were found within the ITS and D1D2 regions, respectively. The two bp substitutions in D1D2 were located at 1036 and 1042 nucleotide positions in the 28S region. These polymorphisms were confirmed in the five strains of P. verrucosa strains except for the two insertions in intron-F and G at 924 and 2239 positions of the 28S, respectively. None of the insertions were found in the Yao strain. BLAST comparisons showed with relatively high homology values that the sequences of both insertions were individually homogeneous to group 1 introns in the database. The positions of insertion for intron-F and G correspond to nucleotide positions 798 and 1921 of Escherichia coli 23S nucleotide sequence accession number J01695 . In addition, although these five strains of P. verrucosa did not possess intron-H, this region of PV28 strain was amplified with the site-specific primer pair (in Table 3) designed from the sequences obtained from another experiment (data not shown) and a 403-nucleotide insert representing intron-H was sequenced. The insertion positions of the intron-H correspond to nucleotide positions 2563 of E. coli 23S nucleotide sequence.
Survey of insertions of P. verrucosa and P. americana
We amplified intron insertion regions using site-specific primer pairs we have designed for intron-F (inF-F and inF-R), intron-G (inG-F and inG-R) and intron-H (L2563F and L2563R), within the 28S region (Table 3). These primer pairs were used to screen and detect PCR amplicons for insertion regions within 34 P. verrucosa and seven P. americana strains. Amplicons were eluted in agarose gel to gain information regarding the intron insertions. No-insertion amplicons for intron-F and intron-G primers were in the size 142 and185 bps, respectively. When insertions were present, intron-F primer pair yielded amplicons in the size range from 531 to 533 bps, and intron-Gs in the size 575 or 578 bps. Moreover, amplicons of about 643 bps for intron-Hs were also eluted. It was revealed that there were 30 intron-F's, four intron-G's and six intron-H's within P. verrucosa and only two intron-Fs within P. americana as shown in Table 1. There was some correlation between intron distribution of P. verrucosa and geographic location, i.e., intron-Fs were found to have prevalence of 88% in P. verrucosa and intron-Hs were found specifically in the South American Continent. No introns were found except for two intron-Fs in P. americana. In addition, the agarose gel profiles allowed us to characterize genotypes and distribution frequencies of insertions from P. verrucosa including no-insertion as shown in Table 1. It was found that occurrence of genotypes F, FG, FH, FGH and N were at 64, 6, 12, 6 and 12%, respectively.
Characterization of the P. verrucosaintronic insertion
RT-PCR was carried out to identify the property of these insertions, namely, whether they are introns or unusual extensions incorporated into mature rRNA. Four representative strains were selected among the 41 strains surveyed. And it was found that two strains (PV1 and PV3) had two introns individually, while the other two strains (PV2 and PV41) had only one intron as shown in Figure 1. Insertions of strain PV1 and PV3 were eluted at 142 bps on lane 2 and 3 with intron-F primer pair, and 185 bps on lane 4 and 5 with intron-G primer pair, respectively. PV2 and PV41 exhibited 142 bps amplicons with intron-F primer pair as shown on lane 15 and 16, respectively. An intron-lacking Yao strain gave 142 and 192 bps amplicons with intron-F and G primer pairs on lane 10 and 11, respectively. The other lanes; namely, 6, 7, 8, 9, 13 and 14 show PCR products of genomic DNA as templates and lane 12 is negative control. These shows that all the insertions were excised after cDNA was transcribed, indicating that they were, as predicted, actively spliced introns. These results point to the possibility that these insertions are group 1 introns.
Moreover, we analyzed sequences of the spliced introns to confirm the boundaries of exon and intron sequences. The last nucleotide of the upstream exon was confirmed to be a T (U in RNA) and the last nucleotide of the intron was a G, consistent with group 1 introns [11, 12].
Phylogenetic relationships of introns F and G of P. verrucosa
Sequences of intron-F and G of ten P. verrucosa strains were sequenced and it was found that DNA sequence polymorphisms exist among the two introns, i.e., the intron-Fs ranged in the size from 389 to 391 bps and the four intron-Gs from 389 to 393 bps shown in Table 2. There were 24 nucleotide substitutions and two deletions/insertions (TH9 strain) within intron-F. There were five nucleotide substitutions among intron-Gs from PV1, PV33 and PV34, unlike 36 substitutions between PV1 and PV3. In addition, Blast search analyses and alignment lead us to believe that intron-Fs and Gs from 14 introns belong to subgroup IC1 of group 1 intron.
Fourteen introns from 12 representative strains of P. verrucosa including Tetrahymena thermophila as out-group were aligned and used for phylogenetic analyses. Neighbor-joining (NJ) and Maximum Parsimony (MP) trees based on the alignment of these intron sequences are shown in Figure 2. The data set consisted of 466 characters, of which 156 were removed from the MP analysis due to ambiguous alignment. Of the remaining 310 characters, 201 were variable and 129 were phylogenetically informative for parsimony analysis. Three major distinct and well-supported clades that had homologous topology were obtained from both phylogenetic analysis methods showing that all the introns analyzed were undergoing a similar rate of evolution. The first clade [I] (87% BS support in NJ, 81% in MP) consisted of six strains having intron-F including 3 clinical isolates, the second clade [II] (57% BS in NJ and 77% in MP) consisted of 4 strains having intron-F, and the third clade [III] (100% BS in both trees) consisted of four G introns. All the introns clustered in clades [I] and [II] are inserted at the same position L798 those in clade [III] at the same position L1921. Introns inserted at the same positions belong to the same clusters and are considered to be the same subgroups. We observed that two Venezuelan strains in clade [II] (TH31 and TH35) included the remnants of homing endonuclease (HE) gene sequences, which were found to invade into IC1 introns of the 18S regions in another study (unpublished data).
Alignment and phylogenetic analysis of the core regions of the group IC1 introns
Alignment of the core regions consisting of highly conserved sequences of the elements of P, Q, R and S and the pairing segment P3 and the nucleotide sequences, in particular, the last two nucleotides GC of the Q element and the first and second GU nucleotides of the R element  (Additional file 2) showed that the introns belong to group IC1. All core region sequences of intron-Fs were found to be identical. Two sequences of core regions termed as intron-G (PV3) and intron-G (PV1, PV33, PV34) were obtained and added to the NJ analysis in Figure 3. The NJ tree was constructed based on the alignment of these core regions consisting of three representative sequences of P. verrucosa and IC1 of 21 taxa drawn from database using IE intron from Neoscytalidium dimidiatum as out-group. The phylogeny of intron-F and G formed separate clades as shown in Figure 3, and indicated that both introns were likely acquired independently. Indeed, all intron-Fs were found to be closely related to Myriosclerotinia ciborium and Sclerotinia tetraspora introns which are located at L798. Two sequences of intron-G located at L1921 were grouped together with 85% BS value and found to be on the neighboring clade with Cordyceps prolifica intron located at L1921. The phylogenetic tree suggests that both introns may be inserted prior to the divergence of the species formerly belonging to clade [IV] and [V]. Collectively, this tree displays that all introns of P. verrucosa generated by the core regions are members of subgroup IC1s.
Modeling of the P. verrucosainsertions revealed that they were group IC1 introns
The predicted secondary structure of the intron-F and G were constructed as follows. The conserved P, Q, R and S regions of intron-F (L798) from PV1 were initially aligned with the same regions from other taxa, and then regions of P1 through P10 were constructed and added on the basis of the secondary structure model as shown in Figure 4[A]. The P10 region was formed using the internal guide sequence (IGS). The catalytic core was defined by a set of structurally conserved elements, including elements P3 to P8. A G-C pair within P7, i.e. G391-C277 of intron-F was assumed to be G-binding positions . Extended P5 and P9 stems were displayed in the putative structure of intron-F from PV1. Nine intron-Fs from nine strains (PV2, 3, 28, 33, 34 and 41 and TH9, 31 and 35) of P. verrucosa were predicted to be the same structures as the putative structure of intron-F derived from PV1 drawn in Figure 4[A], alternatively, shown in Additional file 3. These nucleotide variations among intron-F were observed mainly in the loop and at four positions where one nucleotide of P5a, two of P5.1a and one of P5.2 stem were positioned. The base pairs GU and CG within P6 were formed in the core region of intron-F . The nucleotides A71, A72, U73 were located in segments J3/4 of PV1 intron-F [15–18]. These predictions of secondary structure revealed that all intron-Fs were IC1 group 1 introns.
The structure of intron-G (L1921) from PV1 was drawn just as was done for intron-Fs (Figure 4[B]). A G-C pair within P7, i.e. G390-C360, was assumed to be the G-binding positions. The GU-CG pair of P6 and the AAU in J3/4 was the same as in the intron-F core region of PV1. This putative intron-G exhibited expanded regions of P1 and P5. The three intron-Gs of PV1, PV33 and PV34 were found to be similar among the three strains. Different features were found in PV3 as shown in Figure 4[C] wherein the sequence of PV3 differed in P1 region among four trains; namely, short stems in P1b and P1c and small bulge loops of L1 and L1a (Additional file 4). Moreover, PV3 added P2.0 and P8c, although the other intron-Gs did not. Prediction structures in the remaining two introns of PV33 and PV34 are not shown. Nevertheless, all subgroups of intron-G were also identified as IC1, based on comparison of tertiary structures across segments P3-7 of the four strains.
In conclusion, we have identified that the ten intron-Fs and four intron-Gs of P. verrucosa belong to IC1 group 1 introns.
Characterization of intron-H
Loss of P5abcd domain in derived S788 introns was correlated with inability to self-splice in vitro in a previous report . Accordingly, we have not confirmed insertion positions of intron-H by RT-PCR. However, we examined PV-28 strain as the representative strain of intron-H by analyzing the sequence alignment of the core region of subgroup IE from other organisms in the database. Moreover, we predicted the secondary structure of this intron-H as shown in Figure 5. The secondary structure modeling revealed distinctive IE sequences, namely, the non-expanding P5 and the expanding P9 regions.
To date, although a variety of introns from eukaryotes have been described in the rRNA gene loci of fungi , few introns in Phialophora species have been reported. An unusually small group 1 intron of 67 bps from the nuclear 18S rDNA has been described in a splicing study of Capronia semiimmersa, a teleomorph of P. americana which is known to be similar to P. verrucosa [20–22]. These small introns contain only P1, P7 and P10 elements, because most of the core regions common in almost all other group 1 introns are missing. Four intron sequences have been reported or registered in dematiaceous fungi; namely, 283 bps within the small subunit (SSU) rDNA from Cadophora gregata f. sp. adzukicola , 339 bps within SSU from Cadophora finlandica (accession number: AF486119), 456 bps within the large subunit (LSU) rDNA from C. semiimmersa  and 397 bps within LSU from Cladophialophora carrionii . These introns have not been subjected to secondary structure analysis. Therefore, we aimed to identify the introns that we found in this study and to investigate the prevalence and phylogenetic relationships of 28S group 1 intron at the intra-species level.
The intron-F, G and H in the 28S rDNA of both species were found to belong to two subgroups, IC1 and IE, of group 1 intron. IC1 at L798 is the most common insertion position as shown in Table 1 and in the CRW website, and insertions at L1921 and L2563 were found comparatively in the database. The loss of most of P5 in the secondary structure of intron-H is believed to be a relatively recent evolutionary event . The three insertions possessed all the ten elements (P1-P10) common in group 1 introns. Enzymatic core regions are especially well conserved in primary and secondary structures, as described in previous reports [12, 25], suggesting that they were derived from a common origin. Peripheral elements of the core have various forms and these variations have been used to subdivide introns into five major subgroups [17, 26]. In this study, the phylogeny obtained in Figure 2 and 3 showed that all IC1 introns inserted into P. verrucosa have been surviving with base substitution/insertion/deletion, especially among peripheral elements as a consequence of some events after the individual insertion of IC1 at L798 and L1921, and may have spread by homing (e.g., [27–29]) or reverse splicing [30–32].
Comparisons of intron-F and G indicate comparative high sequence divergence within P. verrucosa wherein the sequence similarity among intron-F's was 94%, and 99% among intron-G's with the exception of PV3 and 90% among all the four intron-G's. The phylogenetic relationships among both introns were very similar to each other (Figure 2). These results suggest that they have diverged from a common origin.
Thirty isolates of P. verrucosa and two isolates of P. americana possessed intron-F, G and H either individually or as a combination of these introns. Genotypes based on the combinations of presence or absence of introns, type and position of insertions were established to discriminate among the isolates surveyed. As a result, five genotypes; namely, F, FG, FH, FGH and N were identified, as shown in Table 1. Type-F was isolated in all the countries where the strains used in the study. Intron distribution was found to have some correlation with geographic location, albeit the number of isolates used was small. For example, most of the Chinese isolates except for Yao-strain had only type-F. Isolates from South American continent had slight tendency to have an intron-H, wherein they were either type-FH or FGH. Intron-G's occurred as type-FG in the clinical isolates of Japan and China and as two type-FGH's in soil isolates of Brazil. In addition, according to an interpretation from a different viewpoint, insight into possible correlation of geographic origin among introns from P. verrucosa strains have emerged from these insertion position results, namely, the spread of L798 among a large number of P. verrucosa isolates and the existence of L1921 and L2563 that coexist with the other intron insertions among the species and strains that have lost introns. L1921 positions are only seen in two clinical isolates from Japan and China and two isolates from Brazilian soil. The L2563 position seems to be specific to the South American continent in six environmental isolates. The possible correlation tendencies shown in our results have also been reported in previous studies described below. For example, group 1 intron CgSSU was found in the SSU rDNA of deuteromycetes mycorrhizal fungus Cenococcum geophilum, and the intron-positive isolates occurred mainly in North America and Europe and negative isolates in Western, Midwestern and Southern North America . In other studies on intron distribution from a single species, four different group 1 intron combinations within LSU rDNA from entomopathogenic hyphomycete Beauveria bassiana were divided into 13 genotypes to investigate distribution frequencies in the population and it was found that there was a tenuous correlation with geographic origin or insect host species . Moreover, M. Márquez, et al. have found three intron insertion positions within LSU rDNA and established seven genotypes among 26 biocontrol isolates for entomopathogenic anamorphic Metarhizum anisopliae .
Meanwhile, we found that five isolates of P. americana had no introns, even though two isolates were detected as type-F. Intron-loss strains might have been lost from taxa possessing intron-F in the common ancestor of the species during its evolution . Further, the lateral transfers appear to have been rare events in P. americana. The fact that intron-F was found in almost all isolates of P. verrucosa, it is believed that intron-F may be specific to P. verrucosa. To confirm this hypothesis, more isolates are needed in the survey and the relationships of the clinical background of the individual patients and the ecological niches of saprobic isolates must be investigated. Further analysis of genotypes within the complete nuclear rDNA gene must be done and the presence of HE gene sequences must be analyzed since they provide key information on intron phylogeny and origin. This study is a first step in the study of introns in P. verrucosa and P. americana.
The three insertions within 28S rDNA of clinical and environmental isolates of P. verrucosa and P. americana allowed us to characterize them into five genotypes using agarose gel electrophoresis patterns. The two insertions, namely, intron-F and G, were characterized as subgroup IC1 by subjecting them to RT-PCR, secondary structure and phylogenetic analysis to determine whether they are true introns, to characterize subgroup and to infer evolutionary relationships, respectively. Another insertion, intron-H, was characterized as an IE intron using BLAST search and by prediction of secondary structure. Furthermore, we also developed a system to classify genotypes based on the presence and distribution of group 1 introns and the distributions as DNA polymorphism among the two species.
Fungal strains and culture conditions
We studied 34 P. verrucosa strains including of five clinical isolates as shown in Table 1. Seven P. americana strains including of three clinical isolates were used as allied species. All the isolates were preserved by using L-drying method and were sub-cultured on potato dextrose ager (Difco) slant before extraction of genomic DNA. For an extraction of total RNA, liquid cultivation was performed in 50-ml Erlenmyer flask containing 20 ml of potato dextrose medium at 30°C for seven days on a rotary shaker at 120 rpm.
Extraction of genomic DNA and total RNA
DNA extraction was performed using an InstaGene Matrix extraction kit (BioRad, Hercules, CA, USA) according to the manufacturer's instructions with minor revisions. Particularly, cells were ground with micro pestle before incubation at 56°C. The extracted DNA was then diluted 1:10 and used as template DNA for PCR amplification.
Total RNA was extracted by using the Nucleic Acid Purification Kit MagExtractor (TM -RNA- TOYOBO, Osaka, Japan). The following procedures were done before carrying out the manufacturer's instructions. Approximately 20 mg (wet weight) of mycelia were washed with water and then rinsed with Schizosaccharomyces pombe spheroplast buffer (20 mM citrate-phosphate buffer (pH 5.6), 50 mM EDTA and 0.9 M sorbitol). This was followed by addition of 100 μl of buffer plus 20 units of Lyticase (L-5263; SIGMA, MO, USA) and 0.01 units of Chitinase (C-7809; SIGMA, MO, USA). The suspension was mixed by vortexing, incubated at 37°C for 30 min and added with 700 μl of a lysis-adsorption solution including 1% 2-mercaptoethanol and pricked with a pipette tip until the solution became viscous. The extracted RNA was treated with RNase-Free DNase Set (QIAGEN). Approximately more than 20 ng/μl RNA was obtained.
PCR amplification and sequencing analysis
A primer walking method was performed to obtain the sequences of the entire 28S rDNA region including ITS. PCR Master Mix (Promega, Madison, WI, USA) and TaKaRa LA Taq (TAKARA Bio Inc, Sigma, Japan) were used depending on the amplification sizes. The PCR conditions for PCR Master Mix consisted of denaturation for 4 min at 95°C, followed by 30 amplification cycles of denaturation at 94°C for 1 min, annealing at primer-dependent temperatures based on Tm values for 1 min and extension at 72°C for 1.5 min, and then 1 cycle of 5 min at 72°C. For TaKaRa LA Taq consisted of denaturation for 1 min at 94°C, followed by 30 cycles of denaturation at 98°C for 5 sec, annealing at primer-dependent temperatures for 30 sec and extension at 72°C for 2 min, and then 1 cycle of 72°C for 10 min. PCR products were purified with SAP-IT (USB Corporation, Cleveland, OH, USA) and then sequenced with primers listed in Table 2 and the BigDye Terminator v3 Cycle Sequencing Kit (Applied Biosystems, Foster City, CA, USA) on an ABI Prism 3130 × l Sequencer (Applied Biosystems, Hitachi). The nucleotide sequences were determined from both strands. To determine base substitutions and intron insertion positions, sequences were aligned by using the alignment function of GENETYX ver. 9.1.1 (GENETYX COOPERATION, Tokyo, Japan).
Determining incidence of introns by agarose gel
The extracted DNA was used as template DNA for the amplification of the insertion regions (intron-F, G and H). PCR was performed individually using PCR Master Mix and the primer pair inF-F and inF-R for intron-F and inG-F and inG-R for intron-G which we newly designed. Primer pair L2563F and L2563R for intron-H was designed based on sequences of exon and group 1 intron on CRW website, because the intron was not inserted in the five representative strains used. PCR conditions were the same as described above and the resulting DNA fragments were resolved by electrophoresis on a 2% agarose gel (NuSieve® 3:1 Agarose, TAKARA Bio Inc, Sigma, Japan) in Tris-borate-EDTA buffer. Presence or absence of individual intron was listed as positive/negative in Table 1. In addition, the strains were categorized into five intron types; namely, F, FG, FH, FGH and N on the basis of the intron insertions.
RT-PCR and colony sequencing
The RT-PCR from total RNA was performed using a SuperScript ™ III One Step RT-PCR System with Platinum Taq DNA Polymerase (Invitrogen, CA, USA) according to the manufacturer's instructions. Ten microliters of RNA was used for a 50 μl reaction mixture consisting of 25 μl of ReactionMix, 2 μl of SuperScript™ III RT/Platinum Taq Mix, 1 ul of each primer inF-F (10 μM) and inF-R (10 μM) for RT-PCR of intron-F and 11 μl of autoclaved distilled water. For RT-PCR of intron-G, primer pair inG-F and inG-R was used. RT-PCR was carried out in the following conditions: cDNA synthesis at 55°C for 30 min, denaturation at 94°C for 2 min, and PCR amplification at 40 cycles of 94°C for 15 sec, 55°C for 30 sec and 68°C for 1.5 min and final extension at 68°C for 5 min. Amplification products were eluted in 3.5% polyacrylamide gel in tris-acetate-EDTA buffer on an electrophoresis run condition of 100 V for 30 min and followed by 75 V for 25 min, together with genomic DNAs amplified with the same primer pairs as control (shown in Figure 1).
The RT-PCR products were purified with the SUPREC-PCR (TAKARA Bio Inc, Sigma, Japan) and ligated into the pGEM-T Easy Vector System (Promega, Madison, WI, USA). Plasmids were transformed into E. coli competent cells (ECOS TM Competent E. coli, JM109, NIPPON GENE Co., LTD., Japan). Transconjugants were selected on LB agar plates containing 50 μg/ml ampicilin and 40 μg/ml of 5-bromo-4-chloro-3-indoyl-β-D-galactopyranoside (X-Gal). The presence of the expected insert was confirmed by PCR and agarose gel electrophoresis. The inserts were sequenced with T7 (5'-TAATACGACTCACTATAGGG-3') and M13 reverse primers (5'-AGGAAACAGCTATGACCATGA-3').
Phylogenetic analysis of introns from P. verrucosa
Nucleotide sequences were aligned using the BioEdit program version 220.127.116.11 . For phylogenetic analysis, alignment gaps were treated as missing data and ambiguous positions were excluded from the analysis. NJ analysis  as distance matrix method and MP analysis as character state method were carried out using PAUP 4.0b10 . For NJ analysis, the distances between sequences were calculated using Kimura's two-parameter model . MP analysis was undertaken with the heuristic search option using the tree-bisection-reconstruction (TBR) algorithm with 1000 random sequence additions to find the global optimum tree. All positions were treated as unordered and unweighted. The maximum tree number was set at 104. To estimate clade support, the bootstrap procedure of Felsenstein  was employed with 1000 replicates in both MP and NJ analyses. Bootstrap (BS) values higher than 50% are indicated.
Alignment and phylogenetic analysis of core sequences
For the comparison with highly conserved sequences of subgroup IC1 from 20 taxa, sequences of elements of P, Q, R and S and the pairing segment P3 were obtained from DDBJ database (accession numbers shown after sample name in Figure 3). These regions do not include IGS, because the sequences in the upstream region of intron insertion positions do not share a common IGS . The NJ tree was constructed after alignment of all the sequences, which ranged from 57 to 60 bps (Additional File 2). Insertion positions are shown after the sample ID or accession number. The insertion position numbering of the taxa refers to the 23S nucleotide sequence of E. coli  except for the Exophiala calicioides which is based on the 18S of Saccharomyces cerevisiae. Taxonomic affiliation was indicated by letters in parentheses; namely, [A], Fungi/Ascomycota; [Ac], Acanthamoebidae; [C], Chlorophyta; [H], Heterolobosea; [M], Mycetozoa and [R], Rhodophyta.
Secondary structure modeling
The secondary structures are proposed from modeling by Michel et al. [14, 26, 43] and computational analysis was done using the Mfold web server available at http://mfold.rna.albany.edu/ and GENETYX Ver.9 software, with manual adjustments. The pairing segments of P1-P10 locations are indicated in Figure 4 and 5. Moreover, the model was manually optimized based on previous studies of group 1 introns [17, 45–47].
Medlar EM: A new fungus, Phialophora verrucosa, pathogenic for men. Mycologia. 1915, 7: 200-203. 10.2307/3753363.
Yamagishi Y, Kawasaki K, Ishizaki H: Mitochondrial DNA analysis of Phialophora verrucosa. Mycoses. 1997, 40 (9-10): 329-334. 10.1111/j.1439-0507.1997.tb00244.x.
Botterel F, Desterke C, Costa C, Bretagne S: Analysis of microsatellite markers of Candida albicans used for rapid typing. J Clin Microbiol. 2001, 39 (11): 4076-4081. 10.1128/JCM.39.11.4076-4081.2001.
Gil-Lamaignere C, Roilides E, Hacker J, Müller FMC: Molecular typing for fungi - A critical review of the possibilities and limitations of currently and future methods. Clin Microbiol Infect. 2003, 9 (3): 172-185. 10.1046/j.1469-0691.2003.00649.x.
Pujol C, Joly S, Lockhart SR, Noel S, Tibayrenc M, Soll DR: Parity among the randomly amplified polymorphic DNA method, multilocus enzyme electrophoresis, and Southern blot hybridization with the moderately repetitive DNA probe Ca3 for fingerprinting Candida albicans. J Clin Microbiol. 1997, 35 (9): 2348-2358.
Vanhee LME, Symoens F, Jacobsen MD, Nelis HJ, Coenye T: Comparison of multiple typing methods for Aspergillus fumigatus. Clin Microbiol Infect. 2009, 15 (7): 643-650. 10.1111/j.1469-0691.2009.02844.x.
Alvarez-Perez S, Garcia ME, Bouza E, Pelaez T, Blanco JL: Characterization of multiple isolates of Aspergillus fumigatus from patients: Genotype, mating type and invasiveness. Med Mycol. 2009, 47 (6): 601-608. 10.1080/13693780802380537.
Nagy E, Kredics L, Antal Z, Papp T: Molecular diagnosis, epidemiology and taxonomy of emerging medically important filamentous fungi. Rev Med Microbiol. 2004, 15: 153-162.
Cannone JJ, Subramanian S, Schnare MN, Collett JR, D'Souza LM, Du Y, Feng B, Lin N, Madabusi LV, Müller KM, Pande N, Shang Z, Yu N, Gutell RR: The Comparative RNA Web (CRW) Site: an online database of comparative sequence and structure information for ribosomal, intron, and other RNAs. BMC Bioinformatics. 2002, 3: 2-10.1186/1471-2105-3-2.
Brosius J, Dull TJ, Noller HF: Complete nucleotide sequence of a 23S ribosomal RNA gene from Escherichia coli. Proc Natl Acad Sci USA. 1980, 77 (1): 201-204. 10.1073/pnas.77.1.201.
Cech TR: The generality of self-splicing RNA: Relationship to nuclear mRNA splicing. Cell. 1986, 44 (2): 207-210. 10.1016/0092-8674(86)90751-8.
Cech T: Conserved sequences and structures of group 1 introns: building an active site for RNA catalysis -- a review. Gene. 1988, 73 (2): 259-271. 10.1016/0378-1119(88)90492-1.
Cech TR, Damberger SH, Gutell RR: Representation of the secondary and tertiary structure of group 1 introns. Nat Struct Biol. 1994, 1 (5): 273-280. 10.1038/nsb0594-273.
Michel F, Hanna M, Green R, Bartel DP, Szostak JW: The guanosine binding site of the Tetrahymena ribozyme. Nature. 1989, 342: 391-395. 10.1038/342391a0.
Lehnert V, Jaeger L, Michel F, Westhof E: New loop-loop tertiary interactions in self-splicing introns of subgroup IC and ID: a complete 3D model of the Tetrahymena thermophila ribozyme. Chem Biol. 1996, 3 (12): 993-1009. 10.1016/S1074-5521(96)90166-0.
Holst-Jensen A, Vaage M, Schumacher T, Johansen S: Structural characteristics and possible horizontal transfer of group 1 introns between closely related plant pathogenic fungi. Mol Biol Evol. 1999, 16 (1): 114-126.
Suh S, Jones KG, Blackwell M: A group 1 intron in the nuclear small subunit rRNA gene of Cryptendoxyla hypophloia, an ascomycetous fungus: Evidence for a new major class of group 1 introns. J Mol Evol. 1999, 48 (5): 493-500. 10.1007/PL00006493.
Bhattacharya D, Cannone J, Gutell R: Group 1 intron lateral transfer between red and brown algal ribosomal RNA. Curr Genet. 2001, 40 (1): 82-90. 10.1007/s002940100227.
Haugen P: Long-term evolution of the S788 fungal nuclear small subunit rRNA group I introns. RNA. 2004, 10 (7): 1084-1096. 10.1261/rna.5202704.
Scott OR, Zhong HY, Shinohara M, LoBuglio KL, Wang CJK: Messenger RNA intron in the nuclear 18S ribosomal RNA gene of deuteromycetes. Curr Genet. 1993, 23 (4): 338-342. 10.1007/BF00310896.
Yan Z, Rogers SO, Wang CJK: Assessment of Phialophora species based on ribosomal DNA internal transcribed spacers and morphology. Mycologia. 1995, 87 (1): 72-83. 10.2307/3760949.
Harris L, Rogers SO: Splicing and evolution of an unusually small group 1 intron. Curr Genet. 2008, 54 (4): 213-222. 10.1007/s00294-008-0213-y.
Chen W: Characterization of a group 1 intron in the nuclear rDNA differentiating Phialophora gregata f. sp. adzukicola from P. gregata f. sp. sojae. Mycoscience. 1998, 39 (3): 279-283. 10.1007/BF02464009.
Gueidan C, Villasenor CR, de Hoog GS, Gorbushina AA, Untereiner WA, Lutzoni F: A rock-inhabiting ancestor for mutualistic and pathogen-rich fungal lineages. Stud Mycol. 2008, 61: 111-119. 10.3114/sim.2008.61.11.
Burke JM: Molecular genetics of group 1 introns: RNA structures and protein factors required for splicing--a review. Gene. 1988, 73 (2): 273-294. 10.1016/0378-1119(88)90493-3.
Michel F, Westhof E: Modelling of the three-dimensional architecture of group 1 catalytic introns based on comparative sequence analysis. J Mol Biol. 1990, 216: 585-610. 10.1016/0022-2836(90)90386-Z.
Dujon B: Group 1 introns as mobile genetic elements: Facts and mechanistic speculations -- a review*. Gene. 1989, 82 (1): 91-114. 10.1016/0378-1119(89)90034-6.
Jurica MS, Stoddard BL: Homing endonucleases: structure, function and evolution. Cell Mol Life Sci. 1999, 55 (10): 1304-1326. 10.1007/s000180050372.
Brett SC, Barry LS: Homing endonucleases: structural and functional insight into the catalysts of intron/intein mobility. Nucleic Acids Res. 2001, 29 (18): 3757-3774. 10.1093/nar/29.18.3757.
Woodson SA, Cech TR: Reverse self-splicing of the Tetrahymena group 1 intron: Implication for the directionality of splicing and for intron transposition. Cell. 1989, 57 (2): 335-345. 10.1016/0092-8674(89)90971-9.
Roman J, Woodson SA: Reverse splicing of the Tetrahymena IVS: evidence for multiple reaction sites in the 23S rRNA. RNA. 1995, 1: 478-490.
Roman J, Woodson SA: Integration of the Tetrahymena group 1 intron into bacterial rRNA by reverse splicing in vivo. Proc Natl Acad Sci USA. 1998, 95: 2134-2139. 10.1073/pnas.95.5.2134.
Shinohara ML, LoBuglio KF, Rogers SO: Group-1 intron family in the nuclear ribosomal RNA small subunit genes of Cenococcum geophilum isolates. Curr Genet. 1996, 29 (4): 377-387. 10.1007/BF02208619.
Wang C, Li Z, Typas MA, Butt TM: Nuclear large subunit rDNA group 1 intron distribution in a population of Beauveria bassiana strains: phylogenetic implications. Mycol Res. 2003, 107 (10): 1189-1200. 10.1017/S0953756203008505.
Márquez M, Iturriaga EA, Quesada-Moraga E, Santiago-Álvarez C, Monte E, Hermosa R: Detection of potentially valuable polymorphisms in four group 1 intron insertion sites at the 3'-end of the LSU rDNA genes in biocontrol isolates of Metarhizium anisopliae. BMC Microbiol. 2006, 6: 77-84. 10.1186/1471-2180-6-77.
Haugen P, Simon DM, Bhattacharya D: The natural history of group I introns. Trends Genet. 2005, 21 (2): 111-119. 10.1016/j.tig.2004.12.007.
Hall TA: BioEdit: a user-friendly biological sequence alignment editor and analysis program for Windows 95/98/NT. Nucleic Acids Symp Ser. 1999, 41: 95-98.
Saitou N, Nei M: The neighbor-joining method: a new method for reconstructing phylogenetic trees. Mol Biol Evol. 1987, 4: 406-425.
Swofford DL: PAUP: Phylogenetic analysis using parsimony [and other methods]. 2003, Sinauer, Sunderland, MA, Version 4
Kimura M: A simple method for estimating evolutionary rates of base substitutions through comparative studies of nucleotide sequences. J Mol Evol. 1980, 16 (2): 111-120. 10.1007/BF01731581.
Felsenstein J: Confidence limits on phylogenies: An approach using the bootstrap. Evolution. 1985, 39 (4): 783-791. 10.2307/2408678.
Hoshina R, Imamura N: Phylogenetically close group 1 introns with different positions among Paramecium bursaria photobionts imply a primitive stage of intron diversification. Mol Biol Evol. 2009, 26 (6): 1309-1319. 10.1093/molbev/msp044.
Cech TR, Damberger SH, Gutell RR: Representation of the secondary and tertiary structure of group 1 introns. Nat Struct Biol. 1994, 1 (5): 273-280. 10.1038/nsb0594-273.
Zuker M: Mfold web server for nucleic acid folding and hybridization prediction. Nucleic Acids Res. 2003, 31 (13): 3406-3415. 10.1093/nar/gkg595.
Johansen S, Johansen T, Haugli F: Structure and evolution of myxomycete nuclear group 1 introns: a model for horizontal transfer by intron homing. Curr Genet. 1992, 22: 297-304. 10.1007/BF00317925.
Egger K: Sequence and putative secondary structure of group 1 introns in the nuclear-encoded ribosomal RNA genes of the fungus Hymenoscyphus ericae. Biochimica et Biophysica Acta (BBA) - Gene Structure and Expression. 1995, 1261 (2): 275-278. 10.1016/0167-4781(95)00012-6.
Perotto S, Nepote-Fus P, Saletta L, Bandi C, Young JPW: A diverse population of introns in the nuclear ribosomal genes of ericoid mycorrhizal fungi includes elements with sequence similarity to endonuclease-coding genes. Mol Biol Evol. 2000, 17 (1): 44-59.
White TJ, Bruns TD, Lee SB, Taylor JW: Amplification and direct sequencing of fungal ribosomal RNA genes for phylogenetics. PCR Protocols: a Guide to Methods and Applications. Edited by: Innis MA, Gelfand DH, Sninsky JJ, White TJ. 1990, London: Academic Press, 315-322.
O'Donnell K: Fusarium and its near relatives. The fungal holomorph: mitotic, meiotic and pleomorphic speciation in fungal systenatics. Edited by: Reynolds DR, Taylor JW. 1993, 225-233.
McCullough MJ, Clemons KV, Stevens DA: Molecular and phenotypic characterization of genotypic Candida albicans subgroups and comparison with Candida dubliniensis and Candida stellatoidea. J Clin Microbiol. 1999, 37 (2): 417-421.
Williamson ECM, Speers D, Arthur IH, Harnett G, Ryan G, Inglis TJJ: Molecular epidemiology of Scedosporium apiospermum infection determined by PCR amplification of ribosomal intergenic spacer sequences in patients with chronic lung disease. J Clin Microbiol. 2001, 39 (1): 47-50. 10.1128/JCM.39.1.47-50.2001.
This study was supported in part by the National BioResource Project of the Ministry of Education, Culture, Sports, Science and Technology, Japan.
KT: conceived the study, designed the experimental plan, performed the experiments, wrote and revised the manuscript. TH: performed the experiments. KK: participated in the coordination of the study, helped draft and revise the manuscript. All authors read and approved the final manuscript.
Electronic supplementary material
Additional file 1: Schematic representation of the large ribosomal subunit 28S gene. The hatched and dotted boxes correspond to the group 1 intron of P. verrucosa inserted at positions 798, 1921 and 2563 relative to the 23S rDNA of the E. coli J01965 sequence. The numbering in the parentheses is relative to the ITS and 28S rDNA sequence of P. verrucosa. (PDF 31 KB)
Additional file 2: Partial alignment of IC1 introns of P. verrucosa and selected introns from the database. Highly conserved sequences of the elements of P, Q, R and S and the pairing segment P3 are also shown. Intron insertion positions relative to E. coli are given after the sample ID or taxon name. * indicates the insertion position relative to the 18S rDNA of the S. cerevisiae sequence. Letters in parentheses indicate taxonomic affiliation: [A], Fungi/Ascomycota; [Ac], Acanthamoebidae; [C], Chlorophyta; [H], Heterolobosea; [M], Mycetozoa; [R], Rhodophyta. (PDF 32 KB)
Additional file 3: Alignment of intron-F used for the phylogenetic analysis and the modeling of secondary structure. The gaps were marked with dashes. The highly conserved (ribozymatic core) regions of the P, Q, R and S were marked with dotted lines. Boxed nucleotides participate in the pairing segments of P1-P10 of the secondary structure model. (PDF 36 KB)
Additional file 4: Alignment of intron-G used for the phylogenetic analysis and the modeling of secondary structure. The gaps were marked with dashes. The highly conserved (ribozymatic core) regions of the P, Q, R and S were marked with dotted lines. Boxed nucleotides participate in the pairing segments of P1-P10 of the secondary structure model. (PDF 37 KB)
About this article
Cite this article
Takizawa, K., Hashizume, T. & Kamei, K. Occurrence and characteristics of group 1 introns found at three different positions within the 28S ribosomal RNA gene of the dematiaceous Phialophora verrucosa: phylogenetic and secondary structural implications. BMC Microbiol 11, 94 (2011) doi:10.1186/1471-2180-11-94
- Core Region
- Maximum Parsimony Analysis
- Restriction Fragment Length Polymorphism
- Homing Endonuclease
- Insertion Position