Skip to main content
  • Methodology article
  • Open access
  • Published:

High throughput MLVA-16 typing for Brucella based on the microfluidics technology

Abstract

Background

Brucellosis, a zoonosis caused by the genus Brucella, has been eradicated in Northern Europe, Australia, the USA and Canada, but remains endemic in most areas of the world. The strain and biovar typing of Brucella field samples isolated in outbreaks is useful for tracing back source of infection and may be crucial for discriminating naturally occurring outbreaks versus bioterrorist events, being Brucella a potential biological warfare agent. In the last years MLVA-16 has been described for Brucella spp. genotyping. The MLVA band profiles may be resolved by different techniques i.e. the manual agarose gels, the capillary electrophoresis sequencing systems or the microfluidic Lab-on-Chip electrophoresis. In this paper we described a high throughput system of MLVA-16 typing for Brucella spp. by using of the microfluidics technology.

Results

The Caliper LabChip 90 equipment was evaluated for MLVA-16 typing of sixty-three Brucella samples. Furthermore, in order to validate the system, DNA samples previously resolved by sequencing system and Agilent technology, were de novo genotyped. The comparison of the MLVA typing data obtained by the Caliper equipment and those previously obtained by the other analysis methods showed a good correlation. However the outputs were not accurate as the Caliper DNA fragment sizes showed discrepancies compared with real data and a conversion table from observed to expected data was created.

Conclusion

In this paper we described the MLVA-16 using a rapid, sophisticated microfluidics technology for detection of amplification product sizes. The comparison of the MLVA typing data produced by Caliper LabChip 90 system with the data obtained by different techniques showed a general concordance of the results. Furthermore this platform represents a significant improvement in terms of handling, data acquiring, computational efficiency and rapidity, allowing to perform the strain genotyping in a time equal to one sixth respect to other microfluidics systems as e.g. the Agilent 2100 bioanalyzer.

Finally, this platform can be considered a valid alternative to standard genotyping techniques, particularly useful dealing with a large number of samples in short time. These data confirmed that this technology represents a significative advancement in high-throughput accurate Brucella genotyping.

Background

The members of the genus Brucella are Gram-negative, facultative intracellular bacteria responsible of a considerable human morbidity and in animals of enormous economic losses [1] due to abortion and infertility in livestock (cattle, goats, and sheep). As brucellosis is a zoonotic disease, practically all human Brucella infections develop from direct or indirect contact to animals. In particular, brucellosis in humans occurs as a sub-acute or chronic illness, that is generally not lethal in previously healthy patients, and can result in a wide variety of manifestations and significant morbidity if the diagnosis is unobserved and treatment is not rapidly initiated [2]. There are nine recognized species of Brucella[3] that differ in their host preference [4]. In particular, the nine recognized host-specific Brucella spp. are: B. abortus which preferentially infects cattle; B. melitensis infects sheep and goats; B. suis infects pigs; B. canis the dog; B. ovis, sheep and goats; B. neotomae the desert wood rat; B. microti the common vole [5]; B.ceti, cetaceans [6]; B. pinnipedialis, seals [6, 7]. Recently, an additional novel species, B. inopinata sp., isolated from a human breast implant infection, was described [8]. Currently, the division in species and between biovars of a given species is performed using differential tests based on phenotypic characterization of lipopolysaccharide (LPS) antigens, phage typing, dye sensitivity, requirement for CO2, H2S production, and metabolic properties [9]. The genotyping of Brucella field strain isolated in outbreaks is an essential tool to better understand the epidemiology of the disease and to give support to the trace-back of infection sources. It is also essential to identify the presence of Brucella strains that can affect livestock populations and new strains that were previously considered to be exotic [10], thus improving the outcomes of the national brucellosis eradication programme. Although brucellosis has been eradicated in Northern Europe, Australia, the USA and Canada, this disease remains endemic in most areas of the world [11]. Therefore, the knowledge of the prevailing genotypes of Brucella spp. present in a country is an important epidemiological tool to assess the necessary steps required for the formulation of policies and strategies for the control of brucellosis in animal populations. In addition, Brucella spp. represent potential biological warfare agents due to the high contagious rates for humans and animals, the non-specific symptoms associated with the infection, and the fact that the organism can be readily aerosolized [12–14]. Therefore, the discrimination between natural outbreaks and/or intentional release of micro-organism agents may be of crucial importance in the context of the bioterrorism. Brucella species are characterised by >80% interspecies homology by DNA-DNA hybridization studies [15, 16] and >98% sequence similarity by comparative genomics [17]. In fact, the sequencing of 16 S rRNA showed a 100% of identity between all of the Brucella spp. [18]. The simple identification of genus and, in some cases, species by PCR assays [19, 20], is adequate for purposes as diagnosis of human/animal disease or identification of food contamination but not for the tracing of outbreaks or bioterrorist attack. Therefore, the development of strain typing methods is essential in order to investigate the source of an epidemic event. Molecular DNA technology such as repetitive intergenic palindromic sequence-PCR (REP-PCR) [21], random amplified polymorphic DNA-PCR (RAPD-PCR) [22], arbitrary primed-PCR (AP-PCR) [23], amplified fragment length polymorphism (AFLP) [24], single nucleotide polymorphism (SNP) [25, 26], and polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) [27] has been employed to sub-type Brucella spp.

In the last years the variable number of tandem repeats (VNTR), allelic hypervariability related to variation in the number of tandemly repeated sequences, were used for the discrimination of bacterial species that display very little genomic diversity. Polymorphic tandem repeat loci have been identified by analysing published genome sequences of B. melitensis 16 M, B. suis 1330, and B. abortus 9-941 [16, 28]. Schemes based on multiple locus VNTR analysis (MLVA) were tested. In Brucella, MLVA schemes with 21 loci (MLVA-21), 15 and 16 loci (MLVA-15 and MLVA-16) were published [12, 16, 29]. The authors used a subset of loci that preserved the clusters corresponding to classical species, comprising markers with repeat unit sizes of 9 bp or greater and good species identification capability ('minisatellites') and markers with repeat unit sizes of up to 8 bp and higher discriminatory power ('microsatellites') [30]. The MLVA band profiles may be resolved by different techniques ranging from low cost manual agarose gels to the more expensive capillary electrophoresis sequencing systems. The most frequently used method is the agarose gel. Recently, a more rapid and inexpensive method based on the Lab on a chip technology has been proposed [31]. This miniaturized platform for electrophoresis applications is able to size and quantify PCR fragments, and was previously used for studying the genetic variability of Brucella spp. [32]. Recently a new high throughput micro-fluidics system, the LabChip 90 equipment (Caliper Life Sciences), was developed. This platform can be considered particularly useful when dealing with a large number of samples in short time. Therefore we evaluated the LabChip 90 system for MLVA typing of Brucella strains applying the selected subset of 16 loci proposed by Al-Dahouk et al. [12] to fifty-three field isolates and ten DNA samples provided in 2006 for Brucella suis ring-trial. Furthermore, twelve DNA samples, provided in 2007 for a MLVA VNTR ring trial and seventeen human Brucella isolates whose MLVA fingerprinting profiles were previously resolved [32, 33], were de novo genotyped.

Results

By means of MLVA-16 on LabChip 90 (Caliper Life Sciences) sixty-three DNA samples, fifty-three field isolates of Brucella (Table 1) and ten DNA provided for Brucella suis ring-trial, were analysed for investigating a broader number of loci. In order to set up the system, DNA samples, previously genotyped by sequencing system and Agilent technology [32, 33], were reanalyzed. DNA from all ninety-two isolates was amplified at 16 loci (MLVA-16 typing assay) to generate multiple band profiles. The LabChip 90 equipment acquires the sample in less than a minute and the analysis of 96 samples in less than an hour. After PCR amplification 5 μl of each reaction was loaded into a 96-well plate and the amplification product size estimates were obtained by the LabChip Gx Software. The data produced by the Caliper system showed band sizing discrepancies compared with data obtained from other electrophoresis platforms. Therefore a conversion table that would allow the allocation of the correct alleles to the range of fragment sizes was created. The table contained for each locus the expected size, the range of observed sizes, including arithmetical average ± standard deviation, and the corresponding allele (Table 2). The variability range for each allele was established experimentally by the analysis of different strain amplification products. Furthermore, in order to look at intra- and interchip variability, each allele was analyzed by repeating five times the analysis on the same chip and different chips. The comparison of the average and standard deviations obtained by the analysis of the intra- and interchip variability by t-test (confidence of interval 95%) shown a P value > 0.005 (data not shown).

Table 1 The fifty-three strains provided by Istituto Zooprofilattico Sperimentale dell'Abruzzo e del Molise - G. Caporale-(Istituto G. Caporale).
Table 2 Comparison between Brucella product sizes estimated by LabChip GX software (Observed size) and actual sizes obtained by direct sequencing of the PCR product or data available in Genbank (Expected size).

The required precision is directly related to the repeat unit size of the loci. Only data with a standard deviation lower than the 50% of the repeat unit size were considered valid. The LabChip 90 equipment MLVA-16 products were separated and DNA fragment sizes were correlated to the alleles by the conversion table. Generally, close alleles were not observed to overlap allowing to assign the correct allele to each observed value. However, the markers Bruce 08, Bruce 21, Bruce 16 and Bruce 19 showed continuity between some neighboring range which may lead to incorrect assignment of allele to the observed value (Table 2). The identified species were compared with the results of the previous analysis [32, 33], obtaining a full concordance for 15 markers while the marker Bruce 19 did not show agreement with the results obtained by the different analysis systems. For the loci including alleles spanning into ambiguous ranges, we performed sequencing of the amplicons showing on Caliper maximum or minimum allele values. Furthermore we performed some random sequencing of the amplicons obtaining a confirmation of the correct assignment (data not shown).

Discussion

Many methods have been developed to differentiate Brucella strains but MLVA currently represents one of the most promising technologies regarding the epidemiology of bacteria with a high genetic homogeneity, such as Brucella ssp. In 2003 Bricker et al [28] published a MLVA based on eight locus scheme. In 2006 Whatmore et al [16] described a new scheme that included the eight of the original loci of Bricker as well as an additional 13 newly VNTR loci to give a 21 locus scheme, VNTR-21, that allowed to provide some resolution at the species level. In the same year a scheme labelled MLVA-15, based on a subset of 15 loci that comprises 8 markers with good species identification capability and 7 with higher discriminatory power, was published [29], and followed by MLVA-16, a slight modification of MLVA-15 [12]. The different alleles, amplified by standard PCR techniques, can be analysed by several electrophoretic techniques as agarose gel, or capillary electrophoresis sequencing. In this paper the attention was addressed on the LabChip 90 equipment (Caliper), a platform based on microfluidics technology specifically developed for measuring the length of DNA fragments and that do not require fluorescent primers. This electrophoresis machine represents a compromise between the more expensive capillary electrophoresis apparatus and the traditional agarose gel electrophoresis. In spite of a lower precision respect to the automated capillary electrophoresis, the ability to acquire 96 amplification product sizes in less than a hour represent an increased time-reduction over the traditional ethidium bromide slab gel electrophoresis, with 40-50 amplification product sizes for the same analysed markers acquired in a higher time [34]. The LabChip 90 represents also a significant improvement respect to other microfluidics systems as e.g. the Agilent 2100 bioanalyzer (Agilent Technologies, Palo Alto, Ca). In effect the LabChip 90 allows performing the strain genotyping in a time equal to one sixth respect to Agilent. Furthermore this system requires less handling as a single plate can be read directly after the PCR reaction, while the Agilent equipment needs a manual charge of the single PCR products for each single chip well. Finally, the LabChip GX software improves efficiency of data acquiring by automating the data flows. In fact, the software allows to export the summary of analysis results to a spreadsheet application, with the consequent elimination of the paper-based flows. As described previously [31, 32] the sizing proposed by the Lab on chip technology does not correspond to the real size, resulting in a shift of a variable value (offset) respect to the real size estimated by sequencing. Therefore, a correspondence table which allows for each range of observed values to assign the expected size and corresponding allele (Table 2) was created. We did not observe in general the overlap among close alleles, allowing to unambiguously assign the correct allele to each observed value. However, for some contiguous alleles we observed a continuity between ranges which may lead to incorrect assignment of allele to the observed value (Table 2). Furthermore, the instrument was not in agreement with the results obtained by the different analysis systems for the marker Bruce 19. The reduced discriminatory ability could be due to the different resolution achieved by such platform related to the fragment sizes (routinely ± 10% in a 150-500 -bp range, ± 15% in a 100-150 -bp range and in a 500-1500 -bp range and ± 20% in a 1500-5000 -bp range). However, the comparison of the results obtained by the MLVA-16 method on the Caliper LabChip 90 platform and those previously resolved by capillary electrophoresis sequencing system and the Lab on a chip technology (Agilent Technologies) showed a good size correlation. Therefore, this platform can be considered a valid alternative to standard genotyping technique, particularly useful dealing with a large number of samples in short time.

Conclusion

In this paper we evaluated high throughput system as the LabChip 90 for MLVA-16 typing of Brucella strains. The MLVA typing data obtained on this equipment showed accurate correlation for those obtained by capillary electrophoresis sequencing and the Agilent 2100 Bioanalyzer, with the exception of Bruce 19. This new platform represents a significant improvement of the genotyping techniques in terms of turnaround times and computational efficiency.

Methods

Brucella strains and DNA extraction

In this study fifty-three field isolates submitted for typing by the Istituti Zooprofilattici Sperimentali to the National Reference Laboratory for brucellosis at the Istituto Zooprofilattico Sperimentale dell'Abruzzo e del Molise-G. Caporale (Istituto G. Caporale) during the 2001-2008 period (Table 1), ten DNA samples, collected in UK, provided at the Istituto Zooprofilattico Sperimentale dell'Abruzzo e del Molise-G. Caporale (Istituto G. Caporale) for Brucella suis ring-trial 2006 (COST 845-Brucellosis in man and animals), seventeen Brucella strains isolated from Sicilian hospitalized patients with acute brucellosis [33], and twelve DNA samples, provided by Dr. Falk Melzer for the Ring trial Brucella 2007 [32], were analysed. The provided DNA samples were extracted by Maxwell 16 Cell DNA purification kit (Promega), according to the manufacturer's instructions.

VNTR amplification

VNTR amplifications were performed according to the method described by Le Flèche et al. [29] and then adapted by Al Dahouk et al [12]. Sixteen sets of primers previously proposed were used in sixteen singleplex: Bruce06, Bruce08, Bruce11, Bruce12, Bruce42, Bruce43, Bruce45, Bruce55 (panel 1), Bruce18, Bruce 19, Bruce21, Bruce04, Bruce07, Bruce09, Bruce16, and Bruce30 (panel 2). Amplification reaction mixtures were prepared in 15 μl volumes using 1U FastStart polymerase Taq (Roche) and containing 1 ng of DNA, 1 × PCR Roche reaction buffer (10 mM Tris-HCl, 2,5 mM MgCl2, 50 mM KCl pH 8.3), 0.2 mM dNTPs (Roche) and 0.3 μM of each flanking primer. The amplification was run in a Peltier Thermal Cycler DNA Engine DYAD (MJ Research) thermocycler as follows: an initial heating at 95°C for 5 min, 35 cycles denaturation at 95°C for 30 sec, annealing at 60°C for 30 sec and extension at 70°C for 60 sec. A final extension was performed at 70°C for 5 min [32].

MLVA-16 analysis

The amplification was performed in 96-well or 384-well PCR plates. The chip was prepared according to manufacturer recommendations (Caliper HT DNA 5 K Kit). Each chip contains 5 active wells: 1 for the DNA marker and 4 for gel-dye solution. For each run it was prepared also a strip well with the ladder (containing eight MW size standards of 100 300 500 700 1100 1900 2900 4900 bp) that was inserted into the appropriate groove of the instrument. The number of samples per chip preparation is 400, equivalent or four 96-well plates or one 384-well plate. After gel preparation, the sample plate was loaded into the plate carrier attached to the robot of the Caliper LabChip 90. During the separation of the fragments, the samples were analyzed sequentially and electropherograms, virtual gel images and table data were shown. Amplification product size estimates were obtained by using the LabChip GX (Caliper Life Sciences). The software allows importing the data to a spreadsheet software and subsequently to the conversion table that, by a special macro set up by our laboratory, allows to assign each size to the corresponding allele. The maximum and minimum value of the observed sizes for each allele was thus established experimentally while the arithmetic average and the corresponding standard deviation (Table 2) were calculated by a statistical function.

Sequencing analysis

The PCR amplicons were purified and sequenced by CEQ 8000 automatic DNA Analysis System (Beckman-Coulter, Fullerton, CA, USA) using a commercial Kit (GenomeLabâ„¢ DTCS-Quick Start Kit, Beckman-Coulter) according to the manufacturer instructions.

References

  1. Pappas G, Papadimitriou P, Akritidis N, Christou L, Tsianos EV: The new global map of human brucellosis. Lancet Infect Dis. 2006, 6: 91-99. 10.1016/S1473-3099(06)70382-6.

    Article  PubMed  Google Scholar 

  2. Araj GF: Human brucellosis: a classical infectious disease with persistent diagnostic challenges. Clin Lab Sci. 1999, 12 (4): 207-12.

    PubMed  CAS  Google Scholar 

  3. Euzeby JP: List of Prokaryotic names with Standing in Nomenclature - Genus Brucella. 2010, [http://www.bacterio.cict.fr/b/brucella.html]

    Google Scholar 

  4. Whatmore AM: Current understanding of the genetic diversity of Brucella, an expanding genus of zoonotic pathogens. Infect Genet Evol. 2009, 9 (6): 1168-84. 10.1016/j.meegid.2009.07.001.

    Article  PubMed  CAS  Google Scholar 

  5. Scholz HC, Hubalek Z, Sedlaek I, Vergnaud G, Tomaso H, Al Dahouk S, Melzer F, Kampfer P, Neubauer H, Cloeckaert A, Maquart M, Zygmunt MS, Whatmore AM, Falsen E, Bahn P, Göllner C, Pfeffer MB, Huber B, Busse H, Nöckler K: Brucella microti sp. nov., isolated from the common vole Microtus arvalis. Int J Syst Evol Microbiol. 2008, 58: 375-382.

    Google Scholar 

  6. Foster JT, Okinaka RT, Svensson R, Shaw K, De BK, Robison RA, Probert WS, Kenefic LJ, Brown WD, Keim P: Real-time PCR assays of single-nucleotide polymorphisms defining the major Brucella clades. Journal of Clinical Microbiology. 2008, 46 (1): 296-301. 10.1128/JCM.01496-07.

    Article  PubMed  CAS  PubMed Central  Google Scholar 

  7. Foster G, Osterman BS, Godfroid J, Jacques I, Cloeckaert A: Brucella ceti sp. nov. and Brucella pinnipedialis sp. nov. for Brucella strains with cetaceans and seals as their preferred hosts. Int J Syst Evol Microbiol. 2007, 57: 2688-2693. 10.1099/ijs.0.65269-0.

    Article  PubMed  CAS  Google Scholar 

  8. Scholz HC, Nöckler K, Göllner C, Bahn P, Vergnaud G, Tomaso H, Al-Dahouk S, Kämpfer P, Cloeckaert A, Maquart M, Zygmunt MS, Whatmore AM, Pfeffer M, Huber B, Busse HJ, De BK: Brucella inopinata sp. nov., isolated from a breast implant infection. Int J Syst Evol Microbiol. 2010, 60 (Pt 4): 801-8. 10.1099/ijs.0.011148-0.

    Article  PubMed  CAS  Google Scholar 

  9. Alton GG, Jones LM, Angus RD, Verger JM: Techniques for the brucellosis. laboratory INRA. 1988, ISBN:2-7380-0042-8

    Google Scholar 

  10. Di Giannatale E, De Massis F, Ancora M, Zilli K, Alessiani A: Typing of Brucella field strains isolated from livestock populations in Italy between 2001 and 2006. Veterinaria Italiana. 2008, 44 (2): 383-388.

    PubMed  Google Scholar 

  11. Thorne ET: Brucellosis. In Infectious Diseases of Wild Mammals. Edited by: Williams ES, Barker IK. 2001, Manson Publishing, 372-395. full_text. Third

    Chapter  Google Scholar 

  12. Al Dahouk S, Le Fleche P, Nockler K, Jacques I, Grayon M, Scholz HC, Tomaso H, Vergnaud G, Neubauer H: Evaluation of Brucella MLVA typing for human brucellosis. J Microbiol Methods. 2007, 69: 137-145. 10.1016/j.mimet.2006.12.015.

    Article  PubMed  CAS  Google Scholar 

  13. Whatmore AM, Perrett LL, MacMillan AP: Characterization of the genetic diversity of Brucella by multilocus sequencing. BMC Microbiol. 2007, 7: 34-10.1186/1471-2180-7-34.

    Article  PubMed  PubMed Central  Google Scholar 

  14. Pappas G, Panagopoulou P, Christou L, Akritidis N: Brucella as a biological weapon. Cell Mol Life Sci. 2006, 63: 2229-36. 10.1007/s00018-006-6311-4.

    Article  PubMed  CAS  Google Scholar 

  15. Verger JM, Grimont F, Grimont PAD, Grayon M: Brucella, a monospecific genus as shown by deoxyribonucleic acid hybridization. Int J Syst Bacteriol. 1985, 35292-295.

    Google Scholar 

  16. Whatmore AM, Shankster SJ, Perrett LL, Murphy TJ, Brew SD, Thirlwall RE, Cutler SJ, MacMillan AP: Identification and characterization of Variable-Number Tandem-Repeat Markers for typing of Brucella spp. J Clin Microbiol. 2006, 44: 1982-1993. 10.1128/JCM.02039-05.

    Article  PubMed  CAS  PubMed Central  Google Scholar 

  17. Kattar MM, Jaafar RF, Araj GF, Le Flèche P, Matar MG, Rached RA, Khalife S, Vergnaud G: Evaluation of a Multilocus Variable-Number Tandem-Repeat Analysis Scheme for Typing Human Brucella Isolates in a Region of Brucellosis Endemicity. J Clin Microbiol. 2008, 45: 3935-3940. 10.1128/JCM.00464-08.

    Article  Google Scholar 

  18. Gee JE, De BK, Levett PN, Whitney AM, Novak RT, Popovic T: Use of 16 S rRNA gene sequencing for rapid confirmatory identification of Brucella isolates. J Clin Microbiol. 2004, 42: 3649-3654. 10.1128/JCM.42.8.3649-3654.2004.

    Article  PubMed  CAS  PubMed Central  Google Scholar 

  19. Bricker BJ: PCR as a diagnostic tool for brucellosis. Vet Microbiol. 2002, 90: 435-446. 10.1016/S0378-1135(02)00228-6.

    Article  PubMed  CAS  Google Scholar 

  20. Bricker BJ, Halling SM: Differentiation of Brucella abortus bv. 1, 2 and 4, Brucella melitensis, Brucella ovis, and Brucella suis bv. 1 by PCR. J Clin Microbiol. 1994, 32: 2660-2666.

    PubMed  CAS  PubMed Central  Google Scholar 

  21. Tscherneva E, Rijpens N, Naydensky C, Herman LMF: Repetitive element sequence based polymerase chain reaction for typing of Brucella strains. Vet Microbiol. 1996, 51: 169-178. 10.1016/0378-1135(96)00036-3.

    Article  Google Scholar 

  22. Tscherneva E, Rijpens N, Jersek B, Herman LMF: Differentiation of Brucella species by random amplified polymorphic DNA analysis. J Appl Microbiol. 2000, 88: 69-80. 10.1046/j.1365-2672.2000.00945.x.

    Article  Google Scholar 

  23. AlMomin S, Saleem M, Al-Mutawa Q: The use of an arbitrarily primed PCR product for the specific detection of Brucella. World Journal of Microbiology & Biotechnology. 1999, 15: 381-385.

    Article  CAS  Google Scholar 

  24. Whatmore AM, Murphy TJ, Shankster S, Young E, Cutler S, Macmillan AP: Use of amplified fragment length polymorphism to identify and type Brucella isolates of medical and veterinary interest. J Clin Microbiol. 2005, 43: 761-769. 10.1128/JCM.43.2.761-769.2005.

    Article  PubMed  CAS  PubMed Central  Google Scholar 

  25. Marianelli C, Ciuchini F, Tarantino M, Pasquali P, Adone R: Molecular characterization of the rpoB gene in Brucella species: new potential molecular markers for genotyping. Microbes Infect. 2006, 8 (3): 860-865. 10.1016/j.micinf.2005.10.008.

    Article  PubMed  CAS  Google Scholar 

  26. Scott JC, Koylass MS, Stubberfield MR, Whatmore AM: Multiplex Assay based on single-nucleotide polymorphisms for rapid identification of Brucella isolates at the species level. Appl Environ Microbiol. 2007, 73 (22): 7331-7337. 10.1128/AEM.00976-07.

    Article  PubMed  CAS  PubMed Central  Google Scholar 

  27. Al Dahouk S, Tomaso H, Prenger-Berninghoff E, Splettstoesser WD, Scholz HC, Neubauer H: Identification of Brucella species and biotypes using polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP). Crit Rev Microbiol. 2005, 31 (4): 191-196. 10.1080/10408410500304041.

    Article  PubMed  Google Scholar 

  28. Bricker BJ, Ewalt DR, Halling SM: Brucella 'Hoof-Prints': strain typing by multi-locus analysis of variable number tandem repeats (VNTRs). BMC Microbiol. 2003, 3: 15-10.1186/1471-2180-3-15.

    Article  PubMed  PubMed Central  Google Scholar 

  29. Le Flèche P, Jacques I, Grayon M, Al-Dahouk A, Bouchon P, Denoeud F, Nöckler K, Neubauer H, Guilloteau LA, Vergnaud G: Evaluation and selection of tandem repeat loci for a Brucella MLVA typing assay. BMC Microbiol. 2006, 143: 2913-2921.

    Google Scholar 

  30. Vergnaud G, Pourcel C: Multiple locus VNTR (variable number of tandem repeat) analysis (MLVA). Molecular identification, systematics and population structure of prokaryotes. Edited by: Stackebrandt E. 2006, Springer-Verlag, Berlin, Germany, 83-104. full_text.

    Chapter  Google Scholar 

  31. Ciammaruconi A, Grassi S, De Santis R, Faggioni G, Pittiglio V, D'Amelio R, Carattoli A, Cassone A, Vergnaud G, Lista F: Fieldable genotyping of Bacillus anthracis and Yersinia pestis based on 25-loci Multi Locus VNTR Analysis. BMC Microbiol. 2008, 8: 21-10.1186/1471-2180-8-21.

    Article  PubMed  PubMed Central  Google Scholar 

  32. De Santis R, Ciammaruconi A, Faggioni G, D'Amelio R, Marianelli C, Lista F: Lab on a chip genotyping for Brucella spp. based on 15-loci multi locus VNTR analysis. BMC Microbiol. 2009, 9: 66-10.1186/1471-2180-9-66.

    Article  PubMed  PubMed Central  Google Scholar 

  33. Marianelli C, Graziani C, Santangelo C, Xibilia MT, Imbriani A, Amato R, Neri D, Cuccia M, Rinnone S, Di Marco V, Ciuchini F: Molecular epidemiological and antibiotic susceptibility characterization of Brucella isolates from humans in Sicily, Italy. J Clin Microbiol. 2007, 45: 2923-2928. 10.1128/JCM.00822-07.

    Article  PubMed  CAS  PubMed Central  Google Scholar 

  34. Vergnaud G, Pourcel C: Multiple locus variable number of tandem repeats analysis. Methods Mol Biol. 2009, 551: 141-158. full_text.

    Article  PubMed  CAS  Google Scholar 

  35. MLVAbank for Bacterial Genotyping. [http://mlva.u-psud.fr/]

Download references

Acknowledgements

This work was part of the European Defence Agency (EDA) project B0060 involving biodefence institutions from Sweden, Norway, the Nederlands, Germany, France and Italy.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Florigio Lista.

Additional information

Authors' contributions

RDes and ACia did the set up of the Brucella MLVA-16 assay. Rdes, ACia and CMa participated to typing work. FL, EDG and MAn did the error checking analysis. SFi and GFa did various sequence analysis. FL, BGe and RDes were in charge of the database and clustering analyses. FL, MAn, and RDes conceived the study. FL and RDes wrote the report. All authors read and approved the final manuscript

Rights and permissions

Open Access This article is published under license to BioMed Central Ltd. This is an Open Access article is distributed under the terms of the Creative Commons Attribution License ( https://creativecommons.org/licenses/by/2.0 ), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Reprints and permissions

About this article

Cite this article

De Santis, R., Ciammaruconi, A., Faggioni, G. et al. High throughput MLVA-16 typing for Brucella based on the microfluidics technology. BMC Microbiol 11, 60 (2011). https://0-doi-org.brum.beds.ac.uk/10.1186/1471-2180-11-60

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://0-doi-org.brum.beds.ac.uk/10.1186/1471-2180-11-60

Keywords