- Methodology article
- Open Access
Establishment of a Cre/loxP recombination system for N-terminal epitope tagging of genes in Tetrahymena
© Busch et al; licensee BioMed Central Ltd. 2010
- Received: 24 April 2010
- Accepted: 13 July 2010
- Published: 13 July 2010
Epitope tagging is a powerful strategy to study the function of proteins. Although tools for C-terminal protein tagging in the ciliated protozoan Tetrahymena thermophila have been developed, N-terminal protein tagging in this organism is still technically demanding.
In this study, we have established a Cre/loxP recombination system in Tetrahymena and have applied this system for the N-terminal epitope tagging of Tetrahymena genes. Cre can be expressed in Tetrahymena and localizes to the macronucleus where it induces precise recombination at two loxP sequences in direct orientation in the Tetrahymena macronuclear chromosome. This Cre/loxP recombination can be used to remove a loxP-flanked drug-resistance marker from an N-terminal tagging construct after it is integrated into the macronucleus.
The system established in this study allows us to express an N-terminal epitope tagged gene from its own endogenous promoter in Tetrahymena.
- loxP Site
- Zygotic Nucleus
- Neo4 Cassette
Epitope tagging has been widely used for the analysis of protein localization, interaction, and function (reviewed in ). It is extremely useful in studying the proteins of the ciliated protozoan Tetrahymena thermophila because epitope tags can be introduced efficiently into endogenous chromosomal loci by homologous recombination in this organism .
In many cases, a protein of interest is tagged by introducing a tag at its C-terminus [3–5] because a drug-resistance marker, which must be introduced in proximity to the tag for the establishment of transgenic strains, rarely disturbs the gene promoter if it is inserted downstream of a target gene; thus, the tagged protein can be expressed at its endogenous levels. We previously established a set of convenient modules designed for PCR- and plasmid-based C-terminal tagging (Kataoka et al. submitted). However, sometimes a C-terminal tag renders the protein dysfunctional, disturbs the localization of the protein, or interferes with the protein's interaction with other molecules. In these cases, tagging the protein at its N-terminus might be advised.
There is a drawback to the N-terminal epitope tagging strategy in general: an insertion of a drug-resistance marker into the upstream region of a gene could disturb its promoter activity. This possibility is especially an issue in the Tetrahymena system because intergenic sequences are relatively short in this organism . To avoid this problem, in previous experiments, N-terminally tagged proteins were expressed from ectopic genome locations, such as rDNA or β-tubulin 1 (BTU1) loci, and/or by ectopic promoters at their endogenous loci [7–10]. However, expression levels and patterns of these ectopically expressed N-terminally tagged proteins could differ from those of their endogenous counterparts and thus might cause mislocalization of proteins or artificial interaction with other molecules. Alternatively, a drug-resistance marker can be inserted into the downstream region of a gene for N-terminal tagging. However, in this case, the entire coding sequence and both the upstream and the downstream flanking sequences of the gene have to be cloned as a single construct, which is sometimes not easy for large genes. In addition, if homologous recombination occurs within the coding sequence, an epitope tag at the N-terminus in the construct would be lost. Moreover, the inserted selectable marker could disturb the expression of the downstream gene.
We intended to use the Cre/loxP recombination system to solve these problems. Cre is a recombinase from the bacteriophage P1 that mediates intramolecular and intermolecular site-specific recombination between two loxP sites . A loxP site consists of two 13 bp inverted repeats separated by an 8 bp asymmetric spacer region. Two loxP sites in direct orientation dictate excision of the intervening DNA between the sites leaving one loxP site behind. This precise excision of DNA can remove a loxP-flanked drug-resistance marker from the N-terminal tagging construct after it is integrated into the macronucleus, and thus allows us to introduce epitope tags to the N-terminus of a gene of interest without disturbing its promoter. Here, we describe the establishment of a Cre/loxP recombination system in Tetrahymena and demonstrate its usefulness for the N-terminal tagging of Tetrahymena genes.
Cre-recombinase localizes to the macronucleus in Tetrahymena
The macronucleus is polyploid and its chromosomes randomly segregate to the daughter nuclei. By stepwise selection with increasing amounts of paromomycin, we intended to obtain strains in which the majority of the endogenous MTT1 loci were replaced by the Cre-expression construct. We realized that some strains became resistant to a much higher concentration of paromomycin (> 4 mg/mL) than other strains (~1 mg/mL). PCR analysis revealed that the former strains did not receive the Cre gene, probably because homologous recombination had occurred at "MTT1-5'-1" and "MTT1-5'-2" (Fig. 1D). In contrast, the latter strains contained both neo5 and the HA-cre1 gene, indicating that homologous recombination had occurred at "MTT1-5'-1" and "MTT1-3'"(Fig. 1C). The reason for the limited growth of HA-Cre1p-expressing cells is probably due to weak MTT1 promoter activity caused by a paromomycin-induced stress. HA-Cre1p expression suppresses cell growth (see below), which might be the reason for the limited resistance of the HA-Cre1p-expressing strain to higher concentrations of paromomycin. We used one of the latter HA-cre1 possessing strains, CRE556, for further study. In this strain, most of the endogenous MTT1 loci were replaced with the HA-cre1 expression construct (Fig. 1E).
Immunofluorescence staining using an anti-HA antibody indicated that HA-Cre1p localized to the macronucleus both in the vegetative cells and conjugating cells (Fig. 2B) after its induction by CdCl2. Importantly, when the CRE556 strain was crossed with a wild-type strain, HA-Cre1p protein was detected in both cells of a pair (Fig. 2B). This result indicates that either HA-Cre1p protein or HA-Cre1p mRNA can be transferred from the CRE556 strain to the partner cell during conjugation. This is not surprising because it is known that RNA and protein is exchanged between mating pairs . Therefore, the CRE556 strain could be used to induce homologous recombination at loxP sites introduced into the macronucleus of any cell that can mate with this strain.
Expression of Cre-recombinase suppresses the growth of Tetrahymena
Because Cre is a nuclease, its expression might be genotoxic to Tetrahymena cells. We tested this possibility by analyzing the growth of the CRE556 strain with and without induction of HA-Cre1p expression. Indeed, growth of the CRE556 strain was significantly suppressed when the cells were cultured in the presence of 1 μg/mL CdCl2, whereas the same amount of CdCl2 had little effect on the growth of the wild-type strain (Fig. 2C). The growth defect in the CRE556 strain is not due to a reduced copy number of the MTT1 gene as expression of HA-cre1 from the BTU1 locus (Supplementary Fig. S1 in Additional file 1) caused similar growth suppression in the presence of CdCl2 (Fig. 2D). These results indicate that the expression of HA-Cre1p has a negative, possibly genotoxic effect on the growth of Tetrahymena cells. Therefore, it is necessary to minimize the exposure of cells to Cre1p when it is used for Tetrahymena transgenesis. The inducible Cre expression system aids in minimizing this toxic effect.
Cre-recombinase can induce precise recombination at loxP sites
The Cre/loxP system can be used for N-terminal epitope tagging
In the loxP-neo4-loxP-EGFP-TWI1 locus, the loxP-neo4-loxP sequence is inserted directly before the first methionine-coding codon of the EGFP-TWI1 fusion gene. Therefore, EGFP-TWI1 can be expressed only after the excision of the neo4 cassette by HA-Cre1p. This system allows us to express N-terminal EGFP-tagged Twi1p from the endogenous TWI1 promoter. Because the parental macronucleus is eventually destroyed at the end of conjugation, the loxP-neo4-loxP-EGFP-TWI1 locus or the neo4-excised loxP-EGFP-TWI1 locus is lost in the sexual progeny. Therefore, to use the loxP-EGFP-TWI1 locus for analyses of EGFP-Twi1p, parental cells must be recovered after the induction of conjugation between the CRE556 and the loxP-neo4-loxP-EGFP-TWI1 strains. Around a quarter of mating wild-type Tetrahymena cells aborts conjugation before producing zygotic nuclei and haploid meiotic micronuclear products are endoreplicated to regenerate a diploid micronucleus. Parental macronuclei are preserved in this process .
We expected that the clones growing poorly in the presence of CdCl2 were derived from the CRE556 strain, while the normally growing clones originated from the loxP-neo4-loxP-EGFP-TWI1 strain. Genomic DNA was extracted from the latter clones and excision of the neo4 cassette was observed by PCR. As shown in Fig. 4B, the PCR product corresponding to the neo4-excised loxP-EGFP-TWI1 locus was observed in 10 out of 13 clones studied. This result indicated that they indeed were derived from the loxP-neo4-loxP-EGFP-TWI1 strain and Cre-recombinase expressed in the CRE556 side of the pair was transported to the loxP-neo4-loxP-EGFP-TWI1 side and efficiently induced neo4 excision. Only one clone failed to produce any PCR products. This clone could be either derived from the CRE556 strain or from progeny cells that we could not correctly identify by the growth assay in the presence of CdCl2. Therefore, the method we established here can efficiently identify parental cells derived from a loxP-possessing strain.
In this study, we have established a Cre/loxP recombination system in Tetrahymena and have demonstrated that this system is useful for N-terminal EGFP tagging of the TWI1 gene. Although we have tested only N-terminal EGFP tagging here, we expect that this system can be applied to any type of epitope tag. However, because one loxP sequence remains after the Cre-mediated recombination event in this system, functionalities (e.g., antigenicities) of each epitope tag could be disturbed by the presence of the short peptides (SQLRIMYAIRSY, see also Fig. 3C) encoded by the loxP sequence. Therefore, validity of this system must be carefully examined for each epitope tag.
We also believe that the system established in this study can be used for internal epitope tagging. In addition, it may be safer to use this system for C-terminal epitope tagging because intergenic sequences are relatively short in Tetrahymena (Eisen et al. 2006) and the presence of a drug-resistance marker at the 3'-flanking region of some genes could disturb the promoter function of a neighboring gene. Moreover, similar to the "brainbow" mouse , combinatory use of multiple loxP mutant sequences may allow us to produce Tetrahymena cells expressing a protein tagged with several different epitope tags by a single transformation experiment followed by Cre-mediated recombination.
Cre/loxP recombination systems have also been used for conditional gene knockouts  and recycling drug-resistance markers for multiple transformations [18–20] in other model organisms. We expect that the system described here can be used for these applications in Tetrahymena as well. However, because Tetrahymena has a polyploid (~50 copies) macronucleus and because the loxP excision did not occur in all of the macronuclear copies in the condition we tested (see Fig. 4B), it will be necessary to improve the recombination efficiency to use the Cre/loxP system for these applications in Tetrahymena. Nonetheless, the existing technique is already applicable to recycle a drug-resistance marker. The macronuclear chromosomes segregate randomly to daughter nuclei, and thus we can obtain cells in which all copies of a locus have a loxP-excised form by phenotypic assortment .
We chose a relatively complex procedure to introduce Cre1p into cells: HA-cre1 expressing cells were mated with cells possessing the loxP target locus. Because of the following two reasons, we believe this strategy has great advantage over other possible methods such as introducing the HA-cre1 gene and a loxP target locus into the same cell. First, as shown in Fig. 2C, expression of HA-Cre1p suppresses cell growth, suggesting that HA-Cre1p is probably toxic to Tetrahymena. Therefore, it is necessary to minimize the exposure of cells to HA-Cre1p. Although the MTT1 promoter, which is driving the HA-Cre1p expression, is inducible by the presence of cadmium, it is known that in the absence of cadmium leaky expression occurs . In our strategy the exposure of cells to HA-Cre1p can be tightly controlled and thus potential cell damages are avoided. Second, if we introduce HA-cre1 and a loxP-flanked marker locus into the same cell, leaky expression of HA-Cre1p from the MTT1 promoter may eliminate the marker. This possibly makes phenotypic assortment difficult. Our strategy is free from this problem because strains containing HA-cre1 and the loxP-flanked marker are prepared separately.
Cre-recombinase can be expressed in Tetrahymena and localizes to the macronucleus. It can induce precise recombination at two loxP sequences in direct orientation in the macronuclear chromosome. The successful construction of a strain expressing N-terminal EGFP-tagged TWI1 from the endogenous TWI1 locus let us conclude that the Cre/loxP recombination system established in this study is a useful tool for N-terminal epitope tagging of Tetrahymena genes.
Tetrahymena strains and culture conditions
Wild-type B2086, CU427 and CU428 strains of Tetrahymena thermophila were provided by Dr. P. J. Bruns (Cornell University). These strains are also available at the Tetrahymena Stock Center (Cornell University). The cells were grown at 30°C in 1× Super Proteose Peptone (SPP) medium  containing 2% proteose peptone. Before mating, the cells were washed and resuspended (~5 × 105 cells/mL) in 10 mM Tris buffer (pH 7.5). After 12-24 h of incubation at 30°C, equal numbers of cells were mixed and mated.
Oligo DNAs used in this study
DNA Sequences (5' to 3')
To construct pMNMM3 (Fig. 1A), which contains an expression cassette that allows inducible gene expression under the control of the MTT1 promoter, first, a ~2 kb region upstream of the MTT1 translational start codon (MTT1-5') and a ~1 kb region downstream of the MTT1 translational stop codon (MTT1-3') were amplified from genomic DNA of CU427 by the PCR Extender System (5-PRIME) with the combinations of primers MTT5'FWXho + MTT5'RV and MTT3'FW + MTT3'RVSpe, respectively. Then, MTT1-5' and MTT1-3' were connected by overlapping PCR with primers MTT5'FWXho and MTT3'RVSpe. The overlapping PCR produced NdeI, BamHI and BglII sites between MTT1-5' and MTT1-3'. The PCR product was cloned into the XhoI and SpeI sites of pBlueScript SK(+) vector (Stratagene) to produce pMMM. Then, the plasmid was digested with AccI, which cuts approximately in the middle of MTT1-5' and was blunt-ended by T4 DNA polymerase. A neo2 cassette (a hybrid H4.1/neo/BTU2 gene) was digested out from pNeo2 (Gaertig et al. 1994) by BamHI and XhoI, blunt-ended, and ligated with the AccI digested/blunt-ended pMMM, resulting in pMNMM. The insertion of neo2 splits MTT1-5' into two ~1 kb segments, named MTT1-5'-1 and MTT1-5'-2. MTT1-5'-2 contains the ~0.9 kb MTT1 promoter , which is sufficient to drive the gene expression in a heavy metal ion-dependent manner. Next, a multi-cloning site, including AvrII, NheI, MfeI, PstI, SbfI and MluI, was produced by inserting the annealed MCSfw and MCSrev oligo DNAs into the BamHI site of pMNMM. The resulting plasmid was named pMNMM2. We could obtain only a few paromomycin-resistant transformants using this construct and experienced difficulties with phenotypic assortments. As the neo2 coding sequence is derived from a bacteriophage and therefore not codon-optimized for Tetrahymena, the expression level of the Neo protein may not be sufficient to produce enough paromomycin-resistant transformants that can be assorted appropriately. Therefore, we replaced neo2 with neo5, in which the neo coding sequence was optimized for Tetrahymena codon usage . To create neo5, a neo4 cassette was amplified from pNeo4  by PrimeStar HS DNA Polymerase (Takara) with Neo4FW and Neo4RV and its MTT1 promoter was replaced using overlapping PCR with the histone H4.1 promoter, which was amplified from pMNMM1 with primers H4fw and H4rev. Then, neo2 from pMNMM2 was removed by SalI and SmaI and replaced with the amplified neo5 cassette, resulting in pMNMM3 (Fig. 1A). The DNA sequence of pMNMM3 can be found in the Additional file 1.
A Cre-recombinase (DDBJ/EMBL/GenBank AAG34515) encoding DNA, which was optimized for Tetrahymena codon-usage, was synthesized (MR. GENE GmbH, Regensburg, Germany) and named cre1. An HA sequence including a short two-amino acid linker (GA) was added at the N-terminus of cre1 by PCR amplifying the cre1 coding sequence using PrimeStar HS DNA Polymerase (Takara) with the primers HA-GA-Cre-NdeFW and Cre-MluRV. Then, this PCR product was cloned into NdeI and MluI sites of pMNMM3 to produce pMNMM3-HA-cre1 (Fig. 1B). The MTT1-5'-1-neo5-MTT1-5'-2-HA-cre1-MTT1-3' construct was excised from the vector backbone by digesting pMNMM3-HA-cre1 with XhoI and SpeI. The DNA sequence of pMNMM3-HA-cre1 can be found in the Additional file 1.
Construction of the loxP-neo4-loxP-EGFP-TWI1 construct by PCR
First, the loxP-neo4-loxP sequence was generated by PCR amplifying the neo4 cassette with the primers LoxNeoFWXho and LoxNeoRV. These primers had loxP sequences at their 5'-termini. PrimeStar HS DNA Polymerase (Takara) was used for all PCR reactions in this section. In parallel, EGFP was amplified by PCR with the primers LoxGFPFW and LoxGFPRVBam using pOptiGFP as a template. pOptiGFP has a EGFP sequence optimized for Tetrahymena codon-usage (Kataoka et al. submitted with this manuscript). A short complementary sequence was designed at the 3'-terminus of loxP-neo4-loxP and the 5'-terminus of EGFP. Then, loxP-neo4-loxP and EGFP PCR products were concatenated by overlapping PCR with LoxNeoFWXho and LoxGFPRVBam. The resulting loxP-neo4-loxP-EGFP was cloned into the BamHI and XhoI sites of pBlueScript SK(+) to create ploxP-neo4-loxP-EGFP.
The loxP-neo4-loxP-EGFP-TWI1 construct (see Fig. 3A) was generated by PCR. The 5'-flanking and N-terminal regions of the TWI1 gene were amplified using the primers TWI1 5LoxFW + TWI1 5LoxRVATGplus and TWI1 NGFPFW + TWI1NGFPRV, respectively, resulting in TWI1-5F and TWI1-N. Also, loxP-neo4-loxP-EGFP was excised from ploxP-neo4-loxP-EGFP using BamHI and XhoI. This fragment had overlapping sequences with the 3' terminus of TWI1-5F and with the 5'- terminus of TWI1-N, respectively. Finally, the three DNA segments, TWI1-5F, loxP-neo4-loxP-EGFP and TWI1-N were combined by overlapping PCR using TWI1 5LoxFW and TWI1 NGFPRV. The PCR product loxP-neo4-loxP-EGFP-TWI1 was purified and used directly for the transformation of Tetrahymena.
Construction of Tetrahymena strains CRE556 and loxP-neo4-loxP-EGFP-TWI1
Biolistic gun transformation was performed as described  to introduce the constructs into the macronucleus by homologous recombination. The B2086 and CU428 wild-type strains were transformed with the digested pMNMM3-HA-cre1 and the loxP-neo4-loxP-EGFP-TWI1 PCR products, respectively. The transformants were selected using 100 μg/mL paromomycin. To select loxP-neo4-loxP-EGFP-TWI1 possessing cells, 1 μg/mL cadmium chloride was added to the medium because neo expression is controlled by the cadmium-dependent MTT1 promoter in neo4. In contrast, cells transformed with the MNMM3-HA-cre1 construct were selected without cadmium due to the two following reasons: 1) the expression of neo in the neo5 cassette is driven by the constitutive histone H4.1 promoter and thus is not dependent on cadmium ions, and 2) the presence of cadmium ions induces the expression of HA-cre1 from the MTT1 promoter in this construct and causes the suppression of cell growth (see Fig. 2C). The endogenous MTT1 or TWI1 loci were replaced with the constructs by phenotypic assortment and selection using increasing concentrations of paromomycin. One of the established strains, CRE556 (mating type II), was used for further studies.
Whole-cell protein extracts were separated by SDS-PAGE and transferred to PVDF membranes. Blots were incubated in blocking solution (1% BSA, 1% skim milk, 0.1% Tween 20 in PBS) with 1:2,000 diluted mouse anti-HA antibody (16B12, Covance) or with 1:10,000 diluted mouse anti-β-tubulin antibody (12G10, Developmental Studies Hybridoma Bank, University of Iowa) and were visualized by incubation with a 1:10,000 dilution of HRP-conjugated anti-mouse IgG antibody (Jackson ImmunoResearch) in the blocking solution followed by a chemiluminescent reaction (GE Healthcare).
Cells were fixed in 3.7% formaldehyde and 0.5% Triton-X 100 for 30 min at RT, resuspended in 3.7% formaldehyde and 3.4% sucrose, and dried on poly-L-lysine (Sigma)-coated cover slips. The samples were blocked for 1 hr at 37°C with 3% BSA (Sigma), 10% normal goat serum (Invitrogen), and 0.1% Tween 20 in PBS followed by incubation in blocking solution containing a 1:2,000 dilution of mouse anti-HA antibody (16B12, Covance) for 2 hr at RT. After washes with PBS containing 0.1% Tween 20, samples were incubated with a 1:2,000 dilution of anti-mouse antibody conjugated with Alexa 488 (Invitrogen) for 1 hr at RT. The samples were washed, incubated with 10 ng/mL DAPI (Sigma) in PBS, mounted with ProLong Gold (Invitrogen), and observed by fluorescence microscopy.
Tetrahymena cell growth assay
Late log cultures of B2086 and CRE556 were diluted to 5 × 103 cells/mL in a fresh 1× SPP medium with or without 1 μg/mL CdCl2 and cultured at 30°C with rotation at 100 rpm. Every 5 hours, cells were counted to monitor cell growth using a model ZB1 Coulter counter (Coulter Electronics Inc).
Construction of Tetrahymena strains expressing HA-cre1 from BTU1 locus
To express HA-cre1 from the BTU1 locus, pBNMB-HA-cre1 was created. First, a ~0.8 kb upstream (BTU1 _5') and a ~0.8 kb downstream (BTU1 _3') region of the BTU1 gene were amplified from the genomic DNA of B2086 by the PrimeStar HS DNA Polymerase (Takara) with the combinations of primers XbaBTU15FW + BTU1_5RV_SSS and BTU1_3FW_SSS + BTU13RVXho, respectively. Then, two PCR products were connected by overlapping PCR with primers XbaBTU15FW and BTU13RVXho. The overlapping PCR produced SalI, SmaI and SpeI sites between BTU1_ 5' and BTU1_ 3'. The PCR product was cloned into the XbaI and XhoI sites of pBlueScript SK(+) vector (Stratagene) to produce pBB. The neo5-MTT1-5'-2 segment was amplified from pMNMM3 by the PrimeStar HS DNA Polymerase with primers neo5_FW_Sal and MTT1_MCS_RV and cloned into the SalI and SpeI site of pBB. Then, an XhoI site was introduced between XbaI and NotI sites by site-directed mutagenesis with primers pBNMB_addXhoS and pBNMB_addXhoAS to produce pBNMB. neo5-MTT1-5'-2-HA-cre segment of pMNMM3-HA-cre1 was excised out by SalI and MluI and cloned into the SalI and MluI site of pBNMB to produce pBNMB-HA-cre1. The plasmid map and the DNA sequence of pBNMB-HA-cre1 can be found in the Additional file 1.
The CU427 wild-type strain was transformed with the BTU1-5'-neo5-MTT1-5'-2-HA-cre1-BTU1-3' construct which was digested out from pBNMB-HA-cre1 and the transformants were selected using 100 μg/mL paromomycin. The endogenous BTU1 loci were replaced with the construct by phenotypic assortment and selection using increasing concentrations of paromomycin. Six strains were selected for further studies.
Induction of Cre-mediated loxP recombination
For the experiment shown in Fig. 2A, exponentially growing B2086 or CRE556 cells were cultured in 1× SPP medium with or without 1 μg/mL CdCl2 for 1.5 hr, or starved B2086 or CRE556 cells were cultured in 10 mM Tris (pH 7.5) with or without 50 ng/mL CdCl2 for 1.5 hr.
For the experiment shown in Fig. 2B, CRE556 and loxP-neo4-loxP-EGFP-TWI1 strains, both pre-starved over night in 10 mM Tris (pH 7.5) were mated and 50 ng/mL CdCl2 was added to the culture at 3.5 hr post-mixing (hpm). At the times indicated, cells were collected for immunofluorescence staining.
For the experiment shown in Fig. 3B, starved CRE556 cells were pre-treated with 50 ng/mL CdCl2 for 1.5 hours and then mated with starved loxP-neo4-loxP-EGFP-TWI1 cells in 10 mM Tris (pH 7.5) in the presence of 25 ng/mL CdCl2. At 2, 4, 6 and 8 hpm, genomic DNA was extracted for loxP excision analysis.
For the experiment shown in Fig. 4B, starved CRE556 cells were pre-treated with 50 ng/mL CdCl2 in 10 mM Tris (pH 7.5) for 1.5 hr and then mated with pre-starved loxP-neo4-loxP-EGFP-TWI1 strains in the presence of 25 ng/mL CdCl2. At 2 hpm, single mating pairs were isolated into drops of 1× SPP medium. Cells were observed about every 2 hr until 6 hpm; then, cells were cloned into fresh drops of 1× SPP medium, in cases where pairs had separated. Cells were cultured for 2 days at 30°C and established clones were cultured in 1 mL 1× SPP medium for ~24 hr. The cells were then inoculated into 1× SPP medium containing 1 μg/mL CdCl2. Clones growing at normal speed in this medium were chosen as candidates for loxP-neo4-loxP-EGFP-TWI1 strain derived cells. This selection is based on the fact that HA-Cre1p expression severely suppresses cell growth (see text for details). The selected strains were used for loxP excision analysis. These procedures are schematically drawn in Fig. 4A.
loxP excision analysis by PCR
Cells were lysed in guanidine solution (4 M guanidine thiocyanate, 0.5% N-lauroyl sarcosine sodium, 25 mM Tris-HCl pH 8.0, 0.1 M 2-mercaptoethanol) and genomic DNA was extracted by conventional extraction with phenol/chloroform (1:1) and precipitated with isopropanol. The loxP-neo4-loxP-EGFP-TWI1 locus or the neo4-excised loxP-EGFP-TWI1 locus was detected using the PCR Extender System (5-PRIME) with the primers TWI15LoxFW and EGFP-NtermRV.
Observation of EGFP-Twi1p
loxP-EGFP-TWI1 cells were mated with the wild-type B2086 strain. Cells were fixed and stored in 25% methanol and 10% formaldehyde over night at 4°C. The samples were incubated with 10 ng/mL DAPI and observed by fluorescence microscopy.
We thank all the members of the Mochizuki group for their useful discussion. The research leading to these results received funding from the European Research Council (ERC) Starting Grant (204986) under the European Community's Seventh Framework Program and from the Austrian Academy of Sciences to KM.
- Brizzard B: Epitope tagging. BioTechniques. 2008, 44 (5): 693-695. 10.2144/000112841.View ArticlePubMedGoogle Scholar
- Cassidy-Hanley D, Bowen J, Lee JH, Cole E, VerPlank LA, Gaertig J, Gorovsky MA, Bruns PJ: Germline and somatic transformation of mating Tetrahymena thermophila by particle bombardment. Genetics. 1997, 146 (1): 135-147.PubMed CentralPubMedGoogle Scholar
- Aronica L, Bednenko J, Noto T, Desouza LV, Siu KW, Loidl J, Pearlman RE, Gorovsky MA, Mochizuki K: Study of an RNA helicase implicates small RNA-noncoding RNA interactions in programmed DNA elimination in Tetrahymena. Genes & development. 2008, 22 (16): 2228-2241. 10.1101/gad.481908.View ArticleGoogle Scholar
- Tsao CC, Gorovsky MA: Tetrahymena IFT122A is not essential for cilia assembly but plays a role in returning IFT proteins from the ciliary tip to the cell body. Journal of cell science. 2008, 121 (Pt 4): 428-436. 10.1242/jcs.015826.View ArticlePubMedGoogle Scholar
- Kurth HM, Mochizuki K: 2'-O-methylation stabilizes Piwi-associated small RNAs and ensures DNA elimination in Tetrahymena. RNA (New York, NY). 2009, 15 (4): 675-685.View ArticleGoogle Scholar
- Eisen JA, Coyne RS, Wu M, Wu D, Thiagarajan M, Wortman JR, Badger JH, Ren Q, Amedeo P, Jones KM: Macronuclear genome sequence of the ciliate Tetrahymena thermophila, a model eukaryote. PLoS biology. 2006, 4 (9): e286-10.1371/journal.pbio.0040286.PubMed CentralView ArticlePubMedGoogle Scholar
- Wiley EA, Ohba R, Yao MC, Allis CD: Developmentally regulated rpd3p homolog specific to the transcriptionally active macronucleus of vegetative Tetrahymena thermophila. Molecular and cellular biology. 2000, 20 (22): 8319-8328. 10.1128/MCB.20.22.8319-8328.2000.PubMed CentralView ArticlePubMedGoogle Scholar
- Yao MC, Yao CH, Halasz LM, Fuller P, Rexer CH, Wang SH, Jain R, Coyne RS, Chalker DL: Identification of novel chromatin-associated proteins involved in programmed genome rearrangements in Tetrahymena. Journal of cell science. 2007, 120 (Pt 12): 1978-1989. 10.1242/jcs.006502.View ArticlePubMedGoogle Scholar
- Lee SR, Collins K: Physical and functional coupling of RNA-dependent RNA polymerase and Dicer in the biogenesis of endogenous siRNAs. Nature structural & molecular biology. 2007, 14 (7): 604-610. 10.1038/nsmb1262.View ArticleGoogle Scholar
- Malone CD, Falkowska KA, Li AY, Galanti SE, Kanuru RC, Lamont EG, Mazzarella KC, Micev AJ, Osman MM, Piotrowski NK: Nucleus-Specific Importin Alphas and Nucleoporins Regulate Protein Import and Nuclear Division in the Bi-Nucleate Tetrahymena thermophila. Eukaryotic cell. 2008Google Scholar
- Sauer B: Manipulation of transgenes by site-specific recombination: use of Cre recombinase. Methods in enzymology. 1993, 225: 890-900. full_text.View ArticlePubMedGoogle Scholar
- Shang Y, Song X, Bowen J, Corstanje R, Gao Y, Gaertig J, Gorovsky MA: A robust inducible-repressible promoter greatly facilitates gene knockouts, conditional expression, and overexpression of homologous and heterologous genes in Tetrahymena thermophila. Proceedings of the National Academy of Sciences of the United States of America. 2002, 99 (6): 3734-3739. 10.1073/pnas.052016199.PubMed CentralView ArticlePubMedGoogle Scholar
- Mochizuki K: High efficiency transformation of Tetrahymena using a codon-optimized neomycin resistance gene. Gene. 2008, 425: 79-83. 10.1016/j.gene.2008.08.007.View ArticlePubMedGoogle Scholar
- McDonald BB: The exchange of RNA and protein during conjugation in Tetrahymena. The Journal of protozoology. 1966, 13 (2): 277-285.View ArticlePubMedGoogle Scholar
- Scholnick SB, Bruns PJ: A genetic analysis of tetrahymena that have aborted normal development. Genetics. 1982, 102 (1): 29-38.PubMed CentralPubMedGoogle Scholar
- Livet J, Weissman TA, Kang H, Draft RW, Lu J, Bennis RA, Sanes JR, Lichtman JW: Transgenic strategies for combinatorial expression of fluorescent proteins in the nervous system. Nature. 2007, 450 (7166): 56-62. 10.1038/nature06293.View ArticlePubMedGoogle Scholar
- Sauer B: Inducible gene targeting in mice using the Cre/lox system. Methods (San Diego, Calif). 1998, 14 (4): 381-392.View ArticleGoogle Scholar
- Abuin A, Bradley A: Recycling selectable markers in mouse embryonic stem cells. Molecular and cellular biology. 1996, 16 (4): 1851-1856.PubMed CentralView ArticlePubMedGoogle Scholar
- Johansson B, Hahn-Hagerdal B: Multiple gene expression by chromosomal integration and CRE-loxP-mediated marker recycling in Saccharomyces cerevisiae. Methods in molecular biology (Clifton, NJ). 2004, 267: 287-296.Google Scholar
- Faix J, Kreppel L, Shaulsky G, Schleicher M, Kimmel AR: A rapid and efficient method to generate multiple gene disruptions in Dictyostelium discoideum using a single selectable marker and the Cre-loxP system. Nucleic acids research. 2004, 32 (19): e143-10.1093/nar/gnh136.PubMed CentralView ArticlePubMedGoogle Scholar
- Orias E, Flacks M: Macronuclear genetics of Tetrahymena. I. Random distribution of macronuclear genecopies in T. pyriformis, syngen 1. Genetics. 1975, 79 (2): 187-206.PubMed CentralPubMedGoogle Scholar
- Gorovsky MA, Yao MC, Keevert JB, Pleger GL: Isolation of micro- and macronuclei of Tetrahymena pyriformis. Methods in cell biology. 1975, 9 (0): 311-327. full_text.View ArticlePubMedGoogle Scholar
This article is published under license to BioMed Central Ltd. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.